140 photos of a swing for a do-it-yourself cottage ^Favorite

Tree swing

Making a classic swing on a tree

 

And this is a classic version of a swing from a board suspended on two cables on a tree branch. The easiest option !!! Spied on wikihow.com

1 photo - the safest node is drawn. We use a nylon ropeso that the tree is less frayed.
2,3 and 4 photos - saw off, grind and drill symmetrical holes.

Step by step photos

• 
• 
• 
• 
• 
• 
•  

Tips:

• - Oak is the best option.
• - Inspect the branch on which you will hang the swing for cracks and signs of illness.
• - If you use chains, we recommend wrapping them in plastic pipes to prevent fingers from getting into them.
• - Check the reliability of the branch every week, as Using a swing can gradually destroy wood.
• - Before using the swing for children, try the swing on the largest member of the family.

 

Swing for children

 

 

If you make a children's swing, you can add a little decor, in this case, the sidewalls were made in the form of cars. However, it doesn’t matter, you can even dinosaurs, the main thing is to be bright and fun. It’s also advisable to pick up the carbines and the crossbar more reliably, after all, children. It is unlikely that they will quietly swing, and admire nature.

Children's room swing for a one-year-old child

 

Do-it-yourself A-shaped garden wooden swing. Drawing. Scheme. Step by step photos

A very detailed design of a wooden swing for the garden.

Such a swing will be within the power of even the most inexperienced master.
These swings are fixed to the ground, installed in concrete bases during pouring (see photo 5). See the design of the bench for this swing on the page below.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

We make a bench for a swing

Below are step-by-step photos, drawings for the manufacture of a wooden bench for a garden swing, which we described above.
This bench is universal and therefore, such a design can be suspended not only on a-shaped swings, but also on other types of swings, for example, it is possible to suspend a ceiling beam in a gazebo.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Mounting options for the upper swing bar

• 
• 
• 
• 
• 
• 
•  

Detailed description one such mounting option

Swing chair

 

If you want to be alone and think in nature about something eternal, swaying in a comfortable chair, build yourself such a swing chair. You must admit that there is something vintage in it, and the fringe with tassels adjusts to a poetic mood.

 

 

 

 

 

 

 

 

 

Swing sofa on the veranda

 

However, why deprive yourself of pleasure at home. If you have a large porch with a strong ceiling, you can make a swing there, for example, in the form of a suspended sofa. Probably nice to take a nap in the fresh air on soft pillows

 

Drawing scheme of a swing with a canopy

To enlarge a picture, click on it.

The illustration shows in detail all the details for the manufacture of such a swing. There are even patterns for cutting side benches. Unfortunately, we could not find a higher quality image, and we could not establish the source of the image.

Image source could not be set.

 

 

 

Swing for the gazebo

 

You can use the swing sofa in such a gazebo pargole. Today they are very fashionable, although not very practical. If it rains, the pillows will have to be saved, but this is so in European. On such a sofa you can imagine that you are on the shores of the Aegean Sea.

Drawing of a swing bench for a gazebo or porch

Such a swing can be hung in not only in the gazebo, but also in any room, the main thing is that the support beam is strong. The step-by-step photos below show detailed creation schemes. In one illustration, there is a template for sawing the side wall from the bench frame.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a bench for a swing

Step by step photos

Click on photo to enlargeI

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Swing with a canopy

 

But for our conditions it is better to do a swing with a roof. It’s not at all difficult to make such a little bench under a small cover. Simply and with taste.

 

Pergola style swing

We found an interesting swing option on diynetwork.com. Below in the gallery you can see step-by-step photos of creating not only swing supports, but also sidenos. By the way, the design is very simple and pretty. Particular elegance is created parallel to the bars on the swing roof, giving the structures the appearance of a pergola.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

DIY sketch of a pergola swing

See step-by-step photos of building a pergola swing. The 3rd photo shows a method of attaching support beams with concrete bases. Due to the many details, it is recommended to fill all the gaps between the pergola wood with a special filler. See the drawing of the bench below.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Drawing of a bench for a pergola swing

Here you can find step-by-step photo instructions for creating a bench for a pergola model described above in the article. This is a fairly simple design, even a beginner can handle it.

• 
• 
• 
• 
• 
• 
• 
•  

 

From the logs ...

 

100+ photo do-it-yourself swing of logs. Schemes. Step by step photos.

 

Or such a summer cottage option. The reliable design of logs with a small roof fits well into the harsh life of the Russian hinterland.

 

 

 

 

 

Swing made of logs with double legs. Step by step photos

The author of the photo claims what did he make these fabulous swings for 3 days!!! Let's take a look at some photos.
1 photo: we have pine logs from 2-3 meters, with a diameter of 10-15 cm.
4 photos: mounting method shown. This is a threaded needle with a diameter of 10 mm. Having crossed the necessary logs in the right places, we drill a hole and, inserting a spoke there, cut it off with a grinder. We screw nuts with washers on both sides of the needle and tighten. Isn’t it simple.
6 photos: we see that the side posts should be symmetrical
7 photos: fasten the side racks. To do this, put the log on top and fasten it with knitting needles.
9 photos: to add strength to the structure, add two inclined stops.
11 photos: bench with dimensions. Frame: 5x7 timber, boards - magpie
The penultimate photo is the painted swing. In my opinion, a bad color. Do not forget to use special tools for processing when painting, so that the wood lasts longer.
Last photo: another bench for the child was attached to the swing. Why !!!
About the foundation. Then in the places of contact of the swing with the ground we pour cement into which at the same time we insert metal bases to which we can then attach our legs.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

We found these step-by-step photos on jawura.com.pl, the author of which is the author of the photos below.

And here is another photo of a swing swing made of logs with a canopy

In the photo below you can see all the details of the mounts. Used chains, carbines, anchors. The angle between the back and bench seat is 100 degrees. We fix all the logs in the same way as in the model above. Surprising ease of mounting the canopy. Unknown author

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

Unusual swing for two

 

If you are drawn to something creative, there are such original swings for two. The design, of course, is complicated, but, as they say, there would be a desire. But, like a small gazebo, it is very convenient to talk face to face, swaying slightly.

 

 

 

 

 

Tire swing chair

 

They almost forgotten about old tires. What kind of swing do not make of them. But not everyone will think of such a chair.

 

 

 

 

 

Do-it-yourself tire swing. Step by step photos

To create such a swing, we need three U-shaped bolts, one carabiner, three chains and a nylon cable. We need a nylon cable so that the tree bark does not fray from the chain. The photo clearly shows how it all is attached, comments are unnecessary.

 

Beautiful swing with forging

 

Such a swing in the openwork arbor, of course luxurybut how beautiful it is. True, not everyone can afford it.

 

 

 

 

Metal swing

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

DIY swing from pallets

 

And if your budget does not include the cost of a swing, then you just need to find an old wooden bookcase and a couple of strong chains. Please, the budget version of the swing is ready.

 

 

Swing bed from pallets (step by step photos)

Here is one of the most common options for making swings from pallets, which is presented on the Internet on almost every site. Therefore, we will not pass him by. Below you can see two photo blocks with step-by-step instructions for creating. And even lower, you can see the photo gallery of finished swings. I think nothing complicated

We connect two pallets with bars

Drill holes for ropes

To enlarge the photo click on them

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Swing from euro pallets

Just saw off half of the euro pallets. We fill in the empty spaces between the boards so that it would be more convenient to sit. We tie the resulting bench for the cables in the manner indicated in the photo. Swing is ready.

 

• 
• 
• 
• 
•