Posted in The best homemade products from around the world

A bench from a log: how to make a bench made of natural wood, instructions

log bench

It shows how to make simple DIY log bench. This is a convenient option for garden furniture, but if a little ennobled, varnished, you get an excellent bench in a rustic style. You can put in the living room and show off to guests that bought this exclusive natural wood bench in an expensive store for decent money. (It’s better not to name the amount).

Tools:

Protective glasses
Chain saw (to cut a log, a chainsaw will do)
Chisel
Sander
Drill
Hammer
Adjustable wrench
Wood glue

What materials will be needed:

The log diameter is 20 cm, (it is possible and thicker, but not thinner) meter long
4 wooden rods (branches, poles) for legs 5 cm and height 45 cm

How to make a bench from a log

Saw off a log and rods of the necessary size. Be sure to follow safety regulationsset forth in the instructions for handling the saw so as not to be injured. This is a nice bench, but it is not worth your hands or feet.
Find a flat section of logs long enough for a bench. The length does not have to be precise, but it should be sufficient so that two people sit with a small spacing and not at the very edge. You can increase the size of three peoplebut then it’s better to add two more legs in the middle for additional support. If you use a log of a larger diameter, you should increase the diameter of the supports and drill holes.
Drill leg holes. Remove the bark. Choose which side you want to sit on. This may not matter depending on the log, but if there is one side with knots and bumps, then, of course, it is better to turn this side down.
Prepare a log and mark a straight line in length on the bottom of the bench. Drill holes 15 cm from the ends of the log at least 5 cm deep. Rotate the log 60 degrees and drill two more holes.
Make and attach your legs. In this project, the bark was not removed from the legs to give the bench a natural look, but you can remove it if it seems to you that it will be better. Fasten the leg in a vise and with a chisel make one end back 4 cm from the end and 2.5 cm in diameter. Check periodicallylike a foot in walks into a hole. It is necessary that the fit is tight enough, and the leg does not stagger. If there is a tent, you can add a pad of wooden pegs.
Sand the top of the bench, as well as each end, to remove splinters and sharp edges.
You can leave the tree as is, but you can use impregnation. Use safety glasses and respiratorso as not to swallow wood dust.

Tip: if you use raw poles, they are easier to cut, but they dry out, so use glue and screws or better find dry wood.

Log benchesIt is a powerful design and sturdy construction. Of course, they are heavy and voluminous, but if there is a chain or chainsaw, then this is not a problem, several pieces can be made in a day. The main drawback is hard physical work, but almost no financial costs. If you want to make a log bench or log bench in your country house, here is a good article with step-by-step instructions: “DIY log bench. 700 photos, step by step instructions» https://i.expert-h.com/en/lavki/skameika-iz-brevna. Choose the appropriate option and get a unique garden furniture that easily adapts to any landscape design or home interior.