DIY chair for children: 280 photos + Drawings Dimensions Instructions

DIY baby chair DIY baby chair

 

Now we will consider the manufacture of a do-it-yourself highchair for a child with and without a back. Check out step by step photos, drawings, mock-ups and instructions for the most detailed photo master classes on creating simple, ordinary and original models. At the end of the article we placed more than 800 photos a variety of chairs for children and also a large photo gallery of stools and chairs for adults. The material used is wood and plywood. It is not at all difficult, simple and fast !!!

 

 

The note: Check out the article

Children table DIY 800 photos, diagrams, step-by-step instructions

 

A stool-chair in the nursery in the form of puzzles.

DIY stools in the shape of puzzlesThese chairs are great for children and can go to the playroom or nursery, and so will be a great solution for kindergarten. The seats of the chairs are made in the shape of puzzles, and therefore, if necessary, these chairs can be combined into a single benchthat in certain cases can be very convenient. You can learn how to make such chairs with your own hands from the step-by-step photos located below.

 

Children's folding chair made of plywood drawings.

Do it yourself

Cut out of plywood

DIY folding chair made from plywood drawings.

DIY folding chair made from plywood drawings.

 

 

A simple chair for a child with a back.

DIY chair drawing for the kitchenDrawings and assembly diagram

See the drawings of the assembly diagram of a simple wooden kitchen chair below in the gallery of step-by-step photos. In this model, we can note a very simple solution for fastening the back of the chair, in which you can not bother about the strength of the backrest with the rest of the chair and maintaining the angle of the backrest.

 

Highchair with bent plywood backrest

Highchair with bent plywood backrest

 

stulchik dlya kormleniya

 


High chair for self-feeding.

Blueprints. Sizes. Schemes

You can make such a chair a table for feeding children with your own hands their plywood 24 mm, as the author advises. Look at the drawings and sizes and a step-by-step master class for making such a chair below. We advise you to order sawing of parts according to the specified drawings in the nearest furniture factory, which saves a lot of time. Do not forget to carefully sand and cover the countertop with eco-friendly material.

Master Class

 

Children's chair in the form of a do-it-yourself car from a palletChair for children in the form of a typewriter tow truck Meter

 

 

It’s a great idea to make a chair in the form of a character Meter cars from the cartoon "Cars". You can make this Adirondack chair and planks from the pallet. Below you can find photos of them taken from different angles.

 

 

 

DIY Kotokota chair with height-adjustable

OR

A growing chair for children.

Do-it-yourself chair with adjustable backrest for a childA chair for a schoolboy adjustable in height can be made with your own hands, called a kotokota and is sold in many online stores. Below are photos of the assembly of such a chair. If you make a trailed table, then turn such a chair into a highchair.

Children's plywood chair

plywood baby chairPlywood, the material is relatively cheap, convenient and therefore quite popular. After repair or reconstruction, usually a lot of scrap remains, which ultimately ends up in the waste container. Shown here how to turn plywood trim into a comfortable chair for children. Basically, the chair is made like a box, which makes it simple, durable and lightweight in order to resize according to your needs. For the manufacture of bolts and screws are not needed, as the whole structure is torn on glue. In addition, you can change the shape of the side panels in this way changing design as you like.  

Design and materials. To design this chair, you only need to know the height and weight of your child. Knowing them, you can make any form of side panels, because the assembly method is the same.

You will need:

  • 2 side panels: two sheets of plywood (50 x 50 cm)
  • Seat panel: 1 sheet of plywood (35 x 35 cm)
  • Back: 1 sheet of plywood (35 x 65 cm)
  • small wooden beams to support the back
  • glue
  • small nails
  • 3 bars (needed to create a rigid frame while the glue dries. Must be shorter than the width of the seat (!)

IMPORTANT! The strength of the seat is determined by the accuracy of assembly and the quality of the adhesive. therefore the width of the seat panel and the width of the rear panel should be the same and straight!

do-it-yourself baby chair

  • Screw the two large plates (side panels) into the corners.
  • Set the dimensions of the side panel of the seat.
  • Cut the profile.
  • Specify the dimensions of a specific angle (radius of approximately 10 cm).
  • Saw off the plywood along the radius, now you have two identical panels.
  • Glue parts
  • Glue the wooden blocks on both side panels (according to the dimensions of the sketch). These bars must support the seat panel and rear panel.
  • The second panel should be identical.
  • Assemble the two side panels with 3 bars. Apply glue to the slats on the rear panel and on the sides of the rear panel. Replace the back cover so that it touches the floor.
  • Apply glue to the seat panel and reinsert it. Wipe off any remaining glue.
  • Clamp the construction with clamps, if you have any. After the glue has dried, remove the bars and round the remaining corners.
  • If you wish, you can make a small shelf under the seat panel.
  • Coat the finished structure with varnish.

Children's chair table - two in one

children chair tableFunctional baby chair, which can also serve as a table. There is a position in the form of a chair, the height can be changed at your discretiontable and position. This design is really very simple to do, see step-by-step photos and you will see this. Surely your children will really like it.

So, let's begin !

Sizes. Cube 400 mm x 400 mm x 400 mm. Very simple;)

What is needed:

  • 2 sides 400 mm x 400 mm
  • Back 400 mm x 364 mm
  • Seat sheet 364 mm x 382 mm

- measure and cut the material
Give the edges the correct shape, the author did it with a chamfer. If there is no milling cutter, the usual sandpaper will do, but you have to sweat. In general, grind the edges and surface. Now you can glue all the details. Take a few clips to make the structure solid. The last step is grinding again. The author does not use any varnishes or paints, considering that this is not necessary for children's furniture. Maybe he is right. Moreover, you can provide this opportunity to children.

 

 

Schemes and drawings of chairs 200 photos

200 photos of chairs

Classic, original, hi-tech and retro - all you can do with your own hands

 

 

Drawings of wooden stools

Wooden stools 300 photos

Save

Save

Save

Save

Save

Save

Save

We advise you to read:

How to make a shelf ...