DIY wooden bed 800 photos, drawings, step-by-step instructions

Wooden single bed do-it-yourself

This guide will show you how to make a single bed (for a mattress measuring 190 x 96 cm) using conventional lumber. Assembly does not require any special skills. Toolsthat were used here are the miter saw, table saw, drill and orbital sander. Although this bed can only be made with circular saws and drills. First cut all lumber in length. This bed was made for a mattress 190 x 96 cm.

If your mattress has a different size, you will have to adjust the rates. The list of materials and sizes of bed details can be found on the website in the detailed instructions. See below in the gallery step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a single bed out of wood

Here is a simple example how to make a single bed do it yourself. But be careful, as soon as you see how easy, affordable and pleasant it is to make your furniture, you simply cannot stop. Actually it’s really not difficult, just read the instructions on the site and see step by step photos. This bed is designed for a little boy, so they used it here purebond plywoodIt is non-toxic, does not contain formaldehyde and is made from environmentally friendly wood. You will need very little time to make a bed of wood with your own handsmaybe a few hours or so.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Upholstered single bed

Here's how to make two upholstered baby beds. Instructions are written for two beds, but if you only need one, just split the materials in half. If you plan to use a standard mattress, you will need adjust the size of the base. Standard mattresses for the crib have a size of 132 x 65 cm, which is too much for this base. Remember to measure your mattress. Detailed instructions with a list of materials can be found on the website.

See below the master class., which includes the manufacture of a bed frame and upholstery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Double plywood bed

Want something out of the ordinary? Try make a double bed out of plywood do it yourself original design.

Not only that here only 3 tools were used, but the cost was only $ 75! The bed was assembled from a sheet of plywood and 10 shelf brackets from ikea. The design is assembled for one mattress, but it can be adjusted to fit mattresses. king and queenif you add the central supports. Full instructions can be read on the website.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

King Bed

For lovers of large dimensions. Here is an example how to make a king size bed from wood do it yourself. The size of the mattress in this case is 202 cm long and 193 cm wide. Sizes of the finished bed: headboard - 85 1/4 216 cm wide (the widest part of the head) x 140 cm in height. The whole bed, when the frame is attached to the head, has a width of 207 x 121 cm. The assembly description can be found in the instructions on the author's website, the link can be found under the gallery. Below is shown master class with the main points of making a wooden bed with your own hands.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Double bed from an array of photos

Here is a photo report from the workshop, how to make a solid wood bed. Of course, this bed is made to order on professional equipment, but if you are independently occupiedBy making furniture at home, this information will probably come in handy.

On the site you can read a large article with a lot of tips and tricks, and look very much lower in the gallery detailed step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY homemade wood bed

Here’s a walkthrough, how to make a wooden bed with your own hands. The instructions on the site are really very detailed, so it will be clear even to a novice master. it queen bed, the manufacture took about 12 hours from the author, including drying time. From materials you will need boards 2.5 m long: 15 pcs. 2x4, 16 pcs. 1x4, 6 pc. 1x8. And 4 more 1x8 180 cm long. Conventional hand tools and circular saw. You need a construction 196 cm long and 152 cm wide, 71 cm high. Thus, the mattress covers 20 cm, so you will need to cover 51 cm with wood. This does not include the use of a mattress box. The bed is assembled in two parts. Make two identical frames from 2x4 boards 76 cm wide and 196 cm long. First, cut (4) outer guides 196 cm long, then all vertical blocks (16 pcs.) 43 cm long and the inside, blocks (24 pcs.) By 68 cm long.

To read the full instructions, how to make a wooden bed with your own hands, use the link under the gallery. See assembly procedure below for step-by-step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a simple bed yourself

Presented here simple wooden bedThis is a one-day project even for a master with little experience. Power tools for making this bed: table saw, hand drill, small planer and belt sander. From materials: three boards 2x8, one 2x10, one 2x10 and two 2x2 bars, all lumber 2.5 m long. How to assemble this simple bed with your own hands is described in detail in the instructions on the site. Below in the gallery you can see several step-by-step photos and diagrams of the design of the bed.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a double bed made of wood with your own hands

Here is an example how to make a wooden double bed with your own hands.

You can look at the master class below. step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY soaring bed

Tired of traditional furniture in the bedroom and want something unusual? DIY do-it-yourself bed - fashionable and stylish. On the Internet you can find a lot of different options for "soaring beds", with lighting, with and without a headboard, built-in nightstands and drawers. And here is presented very simple example. The design is this. The frame will be supported on the main base frame with a second level that supports the mattress box. The second level should correspond to the level below. Also add on top side stripsto ensure a uniform level box mattress. Attach the side walls, which can be covered with gray upholstery and cotton. Below you can see how it looks on the sketches.

There are not many step-by-step photos, but you can read a small instruction on the site.

• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a wooden bed drawing

Shown here how to make a wooden bed frame do it yourself. This is not a difficult project, in addition, a good opportunity to improve your skills and save some money. This guide will show you how to make cheap and simple bed framemade from wooden boards. To assemble a large qualification is not required, an initial experience and a few tools and materials are enough. Very important determine the size of the mattresswhich you are going to use and make a complete plan before starting the project.

Here necessary materials with dimensionswhich you have to cook. Details are indicated by letters in the diagram to the right.

• A - 2 boards 2 × 10 length 80 1/2 ”(205 cm)
• B - 2 boards 2 × 10 length 63 1/2 ”(161.5 cm)
• C - 4 bars 4 × 4 5 ”(12.5 cm) long legs
• D - 3 bars 2 × 2, length 80 1/2 ”(205 cm)
• E - 16 boards 1 × 4 - 60 strips 60 1/4 ”long (153 cm)

See below the master class with step by step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a bed do it yourself fast and cheap

See an example in about an hour make a cheap queen size bed, with storage space for less than $ 30 using a minimum amount of tools. This bed can be safely called budget optionso conceived that the design should be cheap, lightweight, durable and with a minimum of waste. Designed for use with a mattress without a box and provides storage space under the size appropriate for ordinary cheap plastic containers. Bed design provides good ventilation for the mattress. The finished dimensions of the upper part of the bed are 193 x 140 cm. The mattress is 152 x 203 cm. A small overhang of the mattress covers the bedtsy planks and will not let you hit them, and also effectively uses the standard length of the boards. Step-by-step instructions, a list of materials and sawing with dimensions can be found on the website. Below see the photo of the master class.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

In the gallery 35 photo examples of bedsmade by this manual.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Wooden bed with high headboard

The design is actually very simple. If you have a desire to do this do-it-yourself wooden bed with a high headboardUse the walkthrough provided here. The project author did it all for one day. The instruction consists of two parts, first make a bed, and then the head. You can fully use one without the other to suit your needs and space. Start by making cuts on the miter saw, and then pocket holes. Using a drill, attach the sides of the bed to the legs with screws through pocket holes. Then attach the side planks with glue and screws. When you assemble both sides, attach the back and front to form the bed frame. Now the headboard! First cut all the boards in size. They are all the same length, but different pocket openings are needed. On some, only at short ends, while for others it is necessary to do both at short ends and on long sides. In the diagrams you can see how you will alternate boards with holes in your pockets when you fasten them.

For pocket holes, use 3 cm screws to attach all boards to the headboard. Do it first. Then attach the 1 × 2 boards to each side using the same screws. Attach the rear support boards with wood glue and trim nails, and then the top board with screws with pocket holes through the support boards and from above.

Full instructions with all the details, tips and tricks can be found on the author’s website. See below the master class on step by step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here is another similar example, how to make a bed with a high wooden headboard. 2 x 8 boards are used as the external frame. To create pocket holes, the author used Kreg K5 Pocket-Hole Jig. They will be needed at the corners of the side boards and along the top of each board. It is very convenient to use the Kreg rectangular clamp, with one end that snaps into the pocket hole and holds the connection board to create a 90 ° angle. It's like an extra hand. After assembling the frame, fix the upper upper crossbars, here it is 2 × 4 and 2 × 2 bars. Be sure to measure these sections, because every millimeter will matter, and this will help to get a good end result. The upper frame of the bed is mounted on 4 sides with pocket holes that are inside the frame. Attach the supports next to each side. They will hold the crossbars that hold the mattress. For fixing, wood glue and 6 cm Spax screws were used. How to complete the assembly of the frame and make the head of the bed, read on in the instructions on the website of the author of the project. See step-by-step photos and diagrams in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself high bed headboard

Here is another great project if you like high head beds.

How to make a bed look at step by step photosIf you have questions, read the instructions on the site.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Wooden bed with headboard

In general, the project is simple, although extremely tedious. You just need to remember the mantra for the next ten hours: "measure, mark, cut, sand, paint, glue, hammer a nail". To make a wooden bed do it yourself, start with the smallest triangles above and below and move towards the center. Instead of using roulette, keep the boards in place and immediately mark. Cut the boards about 5 mm in length and then 2 mm (about half the width of the saw blade) to provide the most precise fit. All ends are cut at an angle of 45º. Note that most of the figures are trapezoids, and some are parallelograms. Tip: start from the center. Find the center of the head, first fold the center planks, then move to the outer edge of the head. You can paint the boards before attaching to the bed. The author used several different impregnations. Honestly, there is no method, right or wrong, just paint as you like, sometimes using the same color, applying layers to two or three different impregnations. Also used here metal brackets. You simply screw them into a tree, and the two parts hook onto each other. Very simple. That's all, add the mattress supports, and the queen-size bed is ready! Detailed assembly can be read on the website.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Design bed in a modern style

This is a very simple design. To do-it-yourself bed, you only need three basic tools: a drill, a Kreg Jig and a miter saw! For onAt first, cut the edges of 2 × 4 boards 8 cm wide to give the bed a modern look. So that the diagonal elements fit better, cut one piece a little longer. Mark the center of the base, align the board and mark the corner cuts. Drill pocket holes at the ends of the diagonal boards and attach the boards to the base with screws and glue.

About the procedure for further assembly can be found on the site. Master class see below in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed platform with headboard

See an example how to make a beautiful do-it-yourself walnut platform bed.

The bed is made in the workshop of John Green to order, if you want to do the same with your own hands, detailed See the photo report below for step-by-step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Simple bed frame

If you are looking for simple and stylish furniture for your bedroom, here is a great example of how to make simple wooden bed frameWell, the headboard can be made separately, if necessary. Detailed instructions can be read on the site, only some comments. It is advisable to assemble the bed on a flat surface. Remember: there are two screws on the vertical beam and one on the horizontal beam that connect the beam assembly to the supports. Only twelve pieces for all four corners. For large mattress sizes, you can add a third crossbar in the center. See below the master class on step by step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY wooden bed frame

Here is an example of how to do it yourself make a frame for a bed. The sequence is as follows. First, measure the box. This is not particularly important at this stage, but ensures that you are not mistaken when purchasing materials. Here are the dimensions of the box for the mattress 134 x 188 cm. Then cut the boards (a list of the necessary materials can be found on the website). To make sure that the frame fits the bed, it is necessary to subtract the double width of the 2x4 bars from the length of the bed. If the bed is 188 cm, you need three bars 2x4s 180 cm long. make a frame for the head, cut in half a 2x4 timber 2.5 m long, so that in the end you get a headboard with a height of about 120 cm. To make base frame, Install the lower and upper parts of the frame parallel to the floor, approximately 180 cm apart. Install three 180 cm beams at both ends of the upper and lower parts, and one in the middle. Screw two screws at the end of the lower beam and into one of the 180 cm beams to get a right angle. Repeat this for all four corners before attaching the middle beam. Complete instructions how to make a bed frame do it yourself read on the site. The assembly process is shown below in step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Assembling a bed frame

This bed frame is designed to accommodate a full-size mattress. The design is designed so that all the details can be set manually without screws or glue. The bed is located at a height of 30 cm from the floor, and the system of connecting strips divides the bed into 12 support squares. Parts are created from a 3D model for CNC cutting. Using Shopbot alpha, the details for the bed are cut from two sheets of plywood 10 x 20 x 2 cm in size. All cuts are made using the 1/4 "end mill for Shopbot.

After cutting the files on the CNC, you need to grind the edges of the parts manually to ensure a tight fit of all parts.

Then assemble the bed, starting from the center slots. Lay out all the parts and start assembly with center slots. Carefully insert the five parts that engage and hold the center of the bed. Then attach the perimeter using butterfly joints. The last part of the assembly is designed to cut the external legs, which are connected to each other using couplings at the corners, as well as mortise and tenon slots for connection with the centers. For a snug fit, tap with a hammer so that the parts are in the same plane. Bed included! Assembly takes about 15 minutes, and disassembly - 8. The bed frame is lightweight, and all parts can be disassembled and transported in a sedan. For stability, use wood glue. Add a mattress and enjoy.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a wooden bed frame

If you already have a mattress, make a wooden frame no problem.

Use it step by step guide and in a few hours you will have a finished bed frame for your bedroom. Detailed instructions can be found on the website.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Upholstered platform bed

To make a bed frame with your own handsIt is important to correctly calculate the dimensions. When measurements are ready, make the longest sides of the bed. Shorter parts can be placed inside. The width of the frame is 150 cm. Take away 1.5 cm of each side. The cross-members should have a length of 144 cm. The central support of 2x4 bars is located at a distance of 200 cm, which is less than 8 cm from the front and rear of the bed to a length of 193 cm. All sections are at an angle of 90 degrees. There is nothing special here, just measure, draw a line, measure again, draw ... then make incisions (a circular saw). Once you get into the rhythm, this part will go surprisingly fast. When you are finished with the sawing, you should get the following: 12 boards 1x4 144 cm long, 2x6 board 200 cm long and one 2x4 block 193 cm long. Complete instructions, how to assemble and upholstery a bed frameread on the site. The assembly process is shown in master class on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed platformToday is a very popular design, it is an interesting and unique design. The platform support system has an integrated foundation, which will consist of support rail systems or may include a base of panels in the structure. Why is it important? Metal frames that rest on the ground usually have a maximum of two, three thin metal transverse supports. This is not adequate support for the mattress. That's where it comes in handy platform frames with their trims and solid panels that are designed specifically for this. Modern designs platform beds give the bedroom a modern style. Below in the gallery there are several options that you can do yourself.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY bed body

If you have carpentry skills, make a bed of wood with your own hands not such a problem. Considering the cost of furniture, this is a great solution if you understand that you can make a bed for 1/4 of the price! With the design, you also won’t have to rack your brains, there are wonderful models on the Internet or furniture stores. You can even take a picture. Seriously, most sellers are happy when you tell them you are looking to see if the bed will fit your decor, and ask if they mind if you take a photo. Take the details that you like and the size of your mattress. Sketch on a piece of paper and decide what you like. Then model using your favorite application ( Sketch Up / AutoCAD, etc..). Take sizes from the app and compare with the design on paper to make sure there are no design problems. Print a 3d model and complete the breakdown stage. This, of course, is for those who are computer savvy. You’d better read about all this on the website, link under the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Wooden bed with storage drawers

Walkthrough how to make a wooden bed do-it-yourself with separate storage drawers. For assembly, you need 2x8 and 2x10 boards. The work does not take much time and money, and if you have step-by-step instructions, the task is simplified. The model presented here is plain wooden frame with slats for the mattress and a low headboard. There is enough storage space under the bed, and thanks to the free space below (without legs in the middle), it is ideal for storing suitcases or drawers or drawers. How to assemble the structure is described in detail in the instructions on the site, See the master class in step-by-step photos below..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Further on the step by step photo shows how to make a box under the bed on wheels. With a size of 80x90 cm, this is a pretty roomy drawer. He rolls very easily, rolling under a bed from a light push. True, this is not always good, especially if you have an uneven floor.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

This is an example with drawings, how to make simple storage drawer under the bed.

The internal volume of the boxes is 100 liters each. Many dressers have only 20 liters of internal volume, so these two drawers compensate for a roomy chest of drawers.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Japanese-style bed do-it-yourself

This low japanese style bed made without a single screw in 16 hours. This is not to say that this is a very complex design, but you have to cut a lot. Therefore, if you take on the job yourself, minimal wood skills should be. The bed was made for a mattress measuring 140 x 200 cm. Remember that the bed is prefabricated, so you need to cut holes in the beam 20x2 cm wide. You can do this with cutters and chisels, or in another way. Holes 2 cm wide should be 8 cm apart. It is not necessary to be too precise + 1cm is absolutely normal! How to do it see below for step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Inlaid bed

In this article, the author shares his mahogany single bed project with cherry inlay. The design of the bed itself is not complicated, the usual frame, just the decorative part of the headboard and footboard takes a lot of time. Inlay, this is the main feature of the bed, so the author spent a lot of time cutting the mahogany boards to the size so that the panel was beveled around the edges. It must be mentioned that this incrustation took 63 hours.

Master class on how the bed was assembled and applied. shown below on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

French style bed

This french bed made according to the textbook “The Art of the Joiner”, written by the famous cabinetmaker and author of the sixteenth-century woodworking treatise Andre Jacob Rubo (1739-1791). Of course, this is not an exact reproduction of the manual, the author changed and adapted several things, but, nevertheless, somewhere close to the original. Roubaud describes 2 types of french bedsone with wooden bars and one with straps. He prefers belts, as he claims that this makes the bed softer, but with modern mattresses that are comfortable enough, the author chose a trellised option. All in all, this is a very interesting project, reproducing a sixteenth-century bed.

If you like stylish furniture, be sure to read the instructions on the site, where there is not only a description of the process, but also quotes and recommendations of Andre-Jacob Rubo himself. In addition, the author made very detailed 110 step by step photoswhich are presented below in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself bunk canopy bed

If you want to create a cozy place for a child, make DIY four-poster bed.

Everything is veryjust need just add curtains. How to do this quickly and efficiently, read the instructions on the site. For clarity the process is shown in step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY wooden bed 200 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•