What to make a bottom filter in the well Favorite

DIY bottom filter DIY bottom filter

What quality the water in your well will be depends on many circumstances. But in most cases, you will need a bottom filter for the well. Before doing it, it is necessary to examine the bottom and determine the formative rock.

What material to make

After that, you can select materials for the bottom filter. For these purposes, you can use the following materials.

  • Coarse Quartz Sand, which can be found on the banks of the river. The size of the grains of sand is approximately 1 mm. Before use, silica sand is washed. This can be done in an ordinary bucket or any other container. Pour sand into it, fill it with water. After 30 - 40 seconds, the remains of clay and silt will remain in the water, and large grains of sand will settle to the bottom. Drain the water several times until it becomes relatively clean.
  • Good to use for filter river pebbles. It can also be gathered on the river bank. Pebbles are a very good material for a well, as it has a chemically neutral composition. Usually these are rounded pebbles of different sizes. Pebbles, like sand, also need to be washed, only this is done with running water, for example, under pressure from a garden hose.
  • In some cases, the bottom filter is used gravel. By its qualities, it is inferior to pebbles, since this stone represents sedimentary porous rock, which contains impurities of sand and clay. Therefore, it is possible to use only new gravel, if it was already used in another system, then due to its porosity, it could accumulate harmful contaminants.
  • Is there some more crushed stone. Although it is used to equip wells, you have to be very careful with the choice. Many types of rubble in their qualities are not suitable for the bottom filter. For example, building rubble from constant contact with water is washed away, and will only contaminate the well. Granite rubble has increased background radiation. So you can only use gravel from neutral materials, for example, jadeite. It is also used for stoves, as this material cleans water well.

We recommend adding shungite to the filter !!!

In order to purify water from compounds of heavy metals, as well as the removal of petroleum products and various organic elements in the bottom filter add shungite. This material is especially necessary if there are any industrial enterprises near the well or your well no deeper than five meters. Shungite not only removes harmful inorganic elements, but also disinfects water.

Hello, I am the author of this article, so I look forward to asking questions for this article in the comments below, I will answer all !!!

 

If you have questions on another topic, ask them on our forum, we will answer you

We advise you to read:

How to make a shelf ...