How to build a wooden fence ^Favorite

How to build a fence from a tree

You can get some pleasure by creating some things yourself, for example, make a wooden fence with your own hands.. It is easy to do even for a beginner; building a fence requires a little skill and tools. In addition, self-construction will save serious money. You just need to do everything step by step, and then you will build your own fence.

Part 1. Ensuring success.

It is important to make sure that your fence is not illegal before you build it. If there are any restrictions on fences in your area or in the city, then all your hard work can be frustrated. Therefore, these details should be clarified in the planning department of your area.
Most cities and districts require a building permit in order to erect a fence. At the place where you will dig, there may be electric, gas and sewer lines. When you apply for permission, city officials will check the construction plan.
You want to make sure that the wood you use lasts a long time, right? If you use high-quality material and treat it well, a wooden fence can stand for 20 years or more. But if you choose the wrong wood, then the fence will last 5 years at best. Consult your local sawmill to find the best material for your construction site.
Choose a style of fencing. There are many different styles of wood fences. His choice depends on the tasks that are set in front of the fence. In this article we will not consider all styles, as it provides general recommendations and can be used in a broad sense for many styles of fences. But you can find the specifics for your style based on these instructions.

Part 2. Construction of the fence

Define your property boundary. Before the start of construction, it is necessary to precisely determine your property boundary so that you do not accidentally cross part of someone else's land. By applying for, the city authorities will provide you with information on where your property border is located, but you can also consult your neighbors or find out from other documents about your property.
Determine the height. Select the height of the fence before entering it into the project. The height of a standard fence is usually in human height, that is, 1.8 - 2 meters. If you need a purely symbolic fence, and you do not mind that everyone sees what is on your site, a meter-long front garden or a low half-meter fence is enough. To completely close from others and achieve maximum security, you can build a three-meter fence.
Location of corners. Place the stakes in the corners of the perimeter so that you can see the overall picture of the fence. Tie a string around the stakes and run the line between the bets. Use a level to make sure that the corners form a right angle.
Dig holes. Use a garden drill to dig holes at breakdown sites. Supports should be buried at least 33% of the height of the column. With a support height of 2 meters, the depth of the hole should be approximately 80 centimeters, because you need to add a few more centimeters for the pillow. In this case, the hole should be wide enough.
Alignment. Install the posts in the holes, just fasten, and check how evenly they are located relative to the perimeter and in height.
Fill supports with concrete. While holding the pole, carefully fill the hole 2/3 with concrete, once again check the installation for evenness and then fill completely.
Installation lag. Prepare bars of the appropriate length.The width between them should not exceed one meter, so a standard fence will need 2 - 3 lags. Attach the guides with screws.
Installation of vertical boards. You can attach vertical boards in various ways and styles, depending on how you want your fence to look. Typically, planks are nailed with a distance of less than one shtaketin width between them. Use gasket to maintain distance. Place the boards in sequence with the center through the gap and a nail clogged in place.
Wood care. After you finish building, pay attention to wood care to increase the durability of your fence. It can be painted or treated in an appropriate way to protect it from the weather. Then the fence will look great for many years.

Tips

Use suitable wood for fencing. Treat with special impregnation to save from rot and insects. Juniper, aromatic cedar lumber to some extent resist rot.
Contact your local authorities to give you official permission to avoid conflicts with your neighbors and to prevent the destruction of communications.
If you are building your fence along the property border, discuss this with your neighbors, so that later there will be no objections along the border of the site. If you have problems, then a professional surveyor will help to solve them.
Installing a fence on uneven terrain is more difficult. If the swings are very steep or too frequent, you may need to invite professionals.
To prevent moisture buildup, mow the top of the fence or install a small metal or vinyl roof.
Pay special attention to the processing of the lower part of the fence and the one that is in the ground. Be sure to soak the boards with sealant or linseed oil. Use quality wood that is more resistant to external influences.
Observe safety measures, use safety glasses and gloves when necessary.