DIY table made of wood. 3800+ photos. Drawings and master classes.

 

Article menu:

The article is very large, so use the menu. Just click on the section of this article that interests you.

• Kitchen tables
• Table for a summer residence
• Computer desk
• Desk
• Coffee table
• Children's table
• Table transformer
• Laptop table

 

DIY kitchen tables

 

 Stylish kitchen table

Simple and tasteful, this one stylish kitchen table it simply captivates with its simplicity, there is a rustic immediacy and forms of modern Art Nouveau.

By the way, this model is very popular, if you want the same in your kitchen, you can do it yourself, guided by the step-by-step pictures below.

• 
• 
• 
• 
• 
• 
• 
•  

 

DIY dining table made of wood

At first glance it might seem making a wooden dining table with your own hands is quite difficult, but what you see in the photo was not done by a professional at all, but what makes us worse? So worth a try. This is a very reliable design made of inexpensive wood and will last a very long time. It took the author ten days to make, and if you have experience, then you can probably do it faster.

The step-by-step instructions used a circular saw, not everyone has it, but if you prepare your materials, you can cut them in the workshop, it’s not so expensive. Still need a drill, chisel and ordinary carpentry tools. The photo has a freehand drawing, but the dimensions can be changed, depending on the size of the kitchen. Pay attention to the frame mount, there are different ways, this is perhaps the simplest, but requires accuracy in the calculations. Further on the photo, see the assembly steps.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

By the way, the design will be a little cumbersome, so final assembly is best done in the kitchen or in the place where you plan to install it.

 

DIY wooden table in the kitchen

This option is not the most difficult, but you are guaranteed to be able to do this work yourself, in just a weekend, if you use step-by-step photos. Also monitor the quality of the wood, then you will probably succeed nice wooden table in the kitchen with good appearance.
Make a list of all the materials needed for this project and select the best offer in the store in terms of price and quality. Make sure that the wooden beams are absolutely straight and do not have any visible defects. Use good glue and clamps to seal tightly around the outer edges of the components to get a good look.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Do-it-yourself round kitchen table

Unfortunately, the layout of the kitchen does not always allow you to get a round table, from a practical point of view it is not very convenient. But it is cozy and creates a special family atmosphere. So if the size of the kitchen allows, making a round kitchen table is a great idea. The most interesting part is the legs or one leg, depending on how you like it. In this case, a simple design on four supports was used, but in a decorative form, so to speak. To make legs, start by creating a template. Of course, to get it beautiful, you’ll have to tinker with it, as you can see in the step-by-step photos, you will need glue, clamps and a good grinding machine.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Source woodgears.ca/table/round_dining.html

 

Round kitchen table on one leg

 

Which support to choose for a round table depends on the weight of the countertop and the aesthetic tastes of the master. A round kitchen table on one leg looks very elegant, in a modern kitchen, such a design is not often found. You can do it yourself using step-by-step photos, though it is not so simple to make a table support, but if you have the necessary equipment, then why not give it a try.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

DIY folding table for a small kitchen

The original idea of ​​a folding table for a small kitchen, consisting of two separate halves. Agree, it’s very convenient, the husband went to have lunch or the child came from school, covered on one table, and on the second, do your chores. In the evening, when the whole family is assembled, you can move the halves for a joint dinner. The tables are connected by hinges, so that all manipulations are very simple.

 

 

 

 

 

The step-by-step photos show how to bring this idea to life. The tables are very simple, without any “bells and whistles”, according to the drawing below, anyone with minimal carpentry skills can assemble it.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Original folding table in the kitchen

A small space requires thinking outside the box. Here is an idea for you - original folding table in the kitchen, which certainly will not take up extra space, or rather, when assembled, it generally takes up no more space than a picture on the wall.

 

 

 

 

 

 

 

 

 

 

The design develops, a bracket is attached to the wall, the table is tilted up and fixed with a regular window shutter. The following is a diagram and how to make such a table with your own hands.

• 
• 
• 
• 
• 
• 
• 
•  

 

Small folding table for the kitchen

One more a good solution for a small kitchen, a table with a folding table topvery comfortable. The place is, like an ordinary small bedside table, easily turns into a dining table for two three people, and with its dimensions is very functional. The design is simple, so making it with your own hands will not be difficult.

 

Here is a diagram, as you can see, materials will also need a minimum.

The assembly order is shown below, the main parts are countertop, bedside table and drawer. Pay attention to the original solution of a double-sided bedside table.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY folding table

Economical, functional, stylish - all this can be said about this nice folding table. It can be installed in the kitchen or small living room, as you see, it does not occupy a place in the assembled state, it just folds out, looks very stylish, and most importantly, you can easily make it yourself. The main element of the table is the frameWhen the table is folded, it will decorate your wall. The design is based on special shelves, which by means of latches keep a table-top in vertical position.

 

 

For stability, you need to make a bedside table and a small table that you see against the wall same height. How to make a beautiful decor for a hinged frame, think for yourself, here an option is offered to install a frame for a picture in the middle, you can, for example, hang a poster or what is fashionable today, make a slate board.

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

DIY kitchen table

 

Everyone wants the kitchen to look stylish and beautiful, but often it is necessary to solve more pragmatic issues: how to place all the necessary furniture in a small space. Unfortunately, most domestic apartments are not as large as we would like, therefore do-it-yourself kitchen sliding table is a good way out the situation. It allows you to significantly save space and maximally compactly place the rest of the furniture. The folding table option presented in this article has a stable and durable design, is quite simple to manufacture and does not require expensive materials. Countertop size when the table is folded 1200×700if you push it apart, the area increases to 1670 mm, and this is at least plus two people fit at the table.
To increase the area of ​​the countertop, a special insert is used, its dimensions and the dimensions of the entire table can be seen on this diagram.

If you are completely making a table from scratch from your materials, you will need a circular saw, jigsaw, drill and screwdriver. The assembly order is basically the same as a regular table, only additionally manufactured sliding insert design from aluminum corners, as well as on the middle of the countertop, additional hinges and latches.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Extensible kitchen tables

as well as folding, retractable and folding

It is the optimization of the usable space in our homes that drives the search for creative solutions, such as folding tables, multi-level sinks, roof rails and bar counters on window sills. Kitchen sliding tables are mainly created for the same purpose.. There are different designs, sometimes very interesting, you yourself can appreciate in this collection.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY large dining table

Each family has its own rules, you can eat at the coffee table, but of course it is better when the whole family gets together to have lunch or dinner more often. AND great when the house has a large dining table, and if it is made with your own hands, then it is also the pride of the owner of the house and the whole family. These step-by-step photos show how to assemble a regular dining table with your own hands from finished parts, this is if you do not have special equipment. Anyway, ordering legs and countertops is much cheaper than buying a finished product.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Single leg square kitchen table

 

The classic version of the kitchen table is rectangular, but if you live together, you can make a square kitchen table, the severity of the square is practical and functional, and if you fix the countertop on one leg, then your kitchen will also look stylish.

 

The support should be primarily reliable, step-by-step photos show the assembly order, all parts are glued and screwed together. To prevent the table from swinging on an uneven floor, you can Additionally add cork pads.

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a standard kitchen table with your own hands

Even a beginner carpenter can make a kitchen table with your own handsand choosing the right tools will make the job a lot easier. This step-by-step guide describes how to build a table with surface dimensions (1.75 x 1.2 meters). You can apply the same plan to products of different sizes by cutting boards of different lengths, or using fewer parts, changing the shape of the legs or crossbars. The picture on the left is just an example, the step by step photos show the process of assembling a standard table with a tabletop from boards. The pictures show the order of joining the countertop boards, assembling the base frame and grinding. Pay attention to the fastening of the diagonal struts.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kitchen table drawer

Here is an example how to make a drawer for a kitchen table from a laminated chipboard. In this case, used roller guides, although you can use ball, expensive metaboxes or simple wooden planks on which the box slides, this is not important. Almost any system is suitable for a conventional kitchen table.

 

In this example, step-by-step photographs show how to assemble the box itself. In general, nothing complicated, the main thing is to make sure that all the angles are right, that is, 90 °, and accordingly, so that there were no distortions. Also note that in mating runners the rollers were directed in one direction.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

One more example, how to make a box for a tablein a more visual embodiment, all the construction details and even the sizes of nails and screws are signed on the pictures, I think it will come in handy for a novice master.

• 
• 
• 
• 
• 
• 
• 
•  

Types of Drawers

A drawer for the kitchen table is a very useful thing, especially for a small kitchen. It is very convenient when everything is at hand, and the drawer of the table is just “at hand”. Structurally, they are not particularly different, so you can do it yourself, this is no more difficult than to put together a simple shelf.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Types of table legs, mounting methods

If with tabletops everything is more or less clear, then table legs and methods of fastening them the most diverse. You can write a lot of interesting things on this subject, but for now just look at the photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Steel I-beam kitchen table

Steel I-beam for the kitchen table legs? Why not.Shelves are made of water pipes, so why a table cannot have legs from a steel beam, for lovers of industrial style this is the very thing. I even found step-by-step photos on the Internet how to make such a table - a specific piece, in assembly it weighs somewhere around 250 kilograms.

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

Do-it-yourself simple kitchen table

 

Indeed, nowhere is easier. Of course, lunch at such a table is not very convenient, but you can have a snack while standing. After all, the working surface is used not only for eating, if the size of the kitchen allows, put two tables, a dining room and a worker.

 

 

 

 

 

Generally such a table is called an islandThey are used mainly for large rooms to increase the working volume of the kitchen, and for a small one, such a compact version with two drawers and a lower shelf is suitable.

 

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Table island for the kitchen

What is an island table? In fact, the table, which is installed in the center of the kitchen, although the "island" of course, sounds romantic. The islands, of course, are different, basically it is a multifunctional design, sometimes with a stove, sink, cabinets and shelves, and sometimes an ordinary dining table is called the island, as you like. The following are examples of some of these “islands”. If the size of the kitchen allows, and you can build something similar, in general, see the photo.

Do-it-yourself island to the kitchen

 

The project is designed for a large room, made this island into the kitchen with your own hands from a regular board based on two lockers. Very convenient in terms of size, the distance between the cabinets can be reduced or increased, especially without changing the entire structure, which only at first glance seems complicated. In fact, the assembly is not particularly difficult, except that in addition to skirting boards, there really have its own nuances.

 

It will be necessary to install the central and side walls in an upright position, or to install cabinets in place, and then arrange the walls around them. Or vice versa, keep the walls in place and slide the cabinets into the openings. When attaching the skirting boards, make sure that the side walls are at right angles to the central wall, and fit snugly against the cabinets. Using a level, make sure that the entire surface of the countertop is level and that there are no distortions. The manufacturing procedure in step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here on the diagrams are marked attachment points.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

In addition, after painting again check the side walls using a plumb lineso that they are at right angles to the rest of the parts. Use adjusting washersto make minor adjustments.

Island to the kitchen with metal worktop

Good option of the island to the kitchen with a stainless steel worktop. The design is relatively uncomplicated, but the island table is basically a small cabinet with a countertop, therefore, in contrast to the manufacture of a conventional table, more attention should be paid to the exact dimensions of the side walls.

Add bracketsto support the countertop of the island, two supports of two centimeters on each edge.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kitchen island from an old chest of drawers

If you have an old chest of drawers, such as the one in the first photo in the gallery, or something like that, you can easily remake the island to the kitchen with your own hands. Although, it’s easy, strongly said, of course, you will have to work. The meaning of the idea is to make a new countertop of the size you need, and remodel the dresser into a floor cabinet.

How did this happen with the author of the Tasha project, see the step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself island to the kitchen

To undertake such a project, of course, some experience is needed. I probably would not have decided, I need a carpenter, a plumber, an electrician and a loader. But made this island into the kitchen with a do-it-yourself sink, according to the author, without involving service workers.

In principle, this is not a manufacture, but an assembly, because almost all parts are ordered or bought in a store. The costs, of course, are large, only to paint this colossus, how much money will be spent on paint. But still, significant savings. In general, if the hands are inserted at that end, then this can not be done.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

By the way, never rely on color samples; in real light on furniture, they always look different. If you need to paint a large surface, it is better to buy one small can, try, and then buy the rest. Perhaps you will lose some money, but it will do without moral damage, but this is so, by the way.

 

Tables for a summer residence

 

 Big table for a summer residence

Large and sturdy farmhouse design Great for a large family. If you decide to buy something like this in a store, it will cost ... in short, very expensive. But why? After all, you can make a similar table for a summer residence with your own hands, buy boards and bars much cheaper.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Note, if the table is in the open, leave a small space between the water drainage boards. The sequence of work, look at the pictures, as you see, everything is quite realistic to do on your own.

 .

Country table with benches

Convenient country table with benches, there are a lot of examples of designs of this form on the Internet, perhaps it can be called classic optionbut it’s called for some reason children’s. Probably because of the way of fastening benches, and of size, of course. Indeed, for people of large build is not a very convenient option. Although you can make the size as you wish, so it’s quite suitable for adults. If painted in a bright color, as in these photographs, then children will certainly enjoy it.

 

 

 

 

 

 

 

 

 

Very comfortable picnic design. Particular attention is required to fasten benches, step-by-step photos show at what maximum height the crossbars should be attached.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Options for tables with benches

The shape can be changed at your discretion, made more decorative or add your ideas to the design. Here in the photos are examples of several options.

• 
• 
• 
• 
• 
• 
• 
•  

 

Cottage pallets with drawer

The main advantage of this design is that it cottage table made of pallets with a drawer there are many options how to use it. You can store drinks for a summer party in a crate, plant beautiful flowers or succulents, which is very fashionable today. Or just put it in a room and use it as a coffee table, and you can always find what to put in the drawer.
Ice for drinks

 

 

 

 

 

 

Beautiful flowers

 

 

 

 

 

 

 

In general, decide, the main thing is to assemble a table, with these step-by-step photos it will not be difficult to do.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

DIY folding table

This is not a street table, but it will look great on a summer terrace or in a gazebo. It’s not difficult to make such a folding table for a summer houseif you know how. And to find out, look at the step-by-step photos, and everything will immediately become clear.

Pay attention to cruciform cuts., which must be done on each leg, they are needed so that the frame does not skew during installation. Also attach especially carefully side jumpers to the tabletop frame. Grinding and painting must be carried out before assembly. The whole process is shown in the photo, the main thing is to follow the sequence.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Folding picnic table

There are many options for folding picnic tables., here is one of them. Simple design, easy to fold, not heavy, with a handle, and most importantly, it is not difficult to do it yourself. According to the author of the photos Bruce vibe, it took him to make one evening. So, everyone can do it, of course, if there is a jigsaw and a drill. I am sure you will love it after the first outing.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself round table

If you like stylish furniture, a round table for giving will look great on the veranda or in the patio. For example, such as in this photo, you immediately feel the atmosphere of relaxation and psychological comfort. Under the countertop, you can use the cover from the old table, any shape and cut a circle. Or take a few boards and fix the plywood sheet on top. In general, this is not a problem, the main thing is to make the legs and fix them to the countertop. How this is done, you can look at the step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Large cottage table do it yourself

Dining table should be big, This option is suitable not only for giving. Such a strong, life-affirming design and youcan do it yourself. There is a diagram and fairly detailed instructions in step-by-step photographs with drawings, sizes and assembly highlights.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Simple cottage table do it yourself

Usually, furniture is brought to the country from city apartments, including tables. Here are just modern models from chipboard that are not very suitable for summer conditions, if you leave it on the street, and even on the veranda, it will not last long. And to buy a ready-made table made of natural wood, the pleasure is not cheap. One way out, do it yourself. Here is a diagram and step-by-step photos, how to make a simple summer table do it yourself.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Schemes and drawings of country tables

Exists many options for country tablesdiffering in shape, style, size. These diagrams and drawings will help to understand the features of different designs..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 Computer desk

 

 Direct do-it-yourself computer tables

Stylish computer desk do-it-yourself

It would be an exaggeration to say that making such a stylish computer desk with your own hands is very simple. Without experience, turning the radii of curved lines is quite difficult. Of course, everything can be simplified and limited to straight lines, but then the table will not be so stylish. But you can deal with everything, because this table was not made at the factory.

Such advice, first you need to cut the base, and then glue specially sawn bar between parts the right size and then adjust the radius. Cope with the edges, and then nothing is complicated, see step-by-step photos and quickly figure it out. Pay attention to the retractable worktop runners placed underneath and not on the sides, so it can withstand a large load, and will not bend. Additional shelves, mounting for the system unit and holes for the wires can be done at your discretion.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY computer table

A desktop built specifically for games allows you to spend time comfortably, providing easy access to everything you might need with minimal effort. And let professional designers do model development, but who said that gaming computer table you can not do it yourself.

The option in the photo, with legs made of metal pipes and wooden countertops and shelves is not the easiest, but reliable and practical. Of course, you will need to buy a lot of parts and use a special tool to work, but look at how much the finished product costs. Instead of attaching the shelves directly to the pipe, you can do wooden ledgeswhich are screwed to the pipe and glued to the bottom of the shelf.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Computer table for a small room

The option is designed for a small room, for example, this computer table is generally in the built-in wardrobe. The step-by-step photos show the sizes, but you can change them to the system unit fits into the table leg. In general, they can be made quite spacious so that nothing superfluous is stored on the table. In this case, the tabletop for the keyboard is not retractable, but this is also a matter of taste, if you slightly reduce the working area of ​​the lower tabletop and put the retractable shelf on the runners, it will be retractable.

• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Adjustable computer desk

An interesting idea of ​​a computer table, in the store you are unlikely to find a model with adjustable height countertops. There are some, but there you basically need to disassemble the structure to adjust the desired height, but here the whole chain drive chip. That is, they simply used bicycle chain sprockets. Well, of course, it's not easy, you need welding and other serious tools, but it will work out very comfortable industrial style table. How to make it, look at the step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY computer desk

Like this a simple computer table with your own hands can be done, say, for a summer residence. Of course, it’s not that completely computer, but rather universal. You can call it written, even kitchen, in my opinion, for a summer residence is quite a suitable option. Under the countertop there is a drawer that can be used as a regular pull-out or remade under the keyboard. Make it simple enough, all the steps are indicated on the diagrams in step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Computer desk in an old cupboard

 

Lack of free space, the number one problem in a small apartment. The computer itself does not take up much space, but there are very many various accessories. There are many ideas for solving the problem, for example, make a computer desk in an old closet. The step-by-step photos show how this can be done with your own hands, in fact a cabinet, a large box with doors, you can do anything just do not forget about the ventilation holes.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Posted by Joseph Truini

Computer table with backlight LED strip

Any design will look very impressive if you make a beautiful backlight. Very popular today led stripThey are safe and easy to use, so they are often used to highlight furniture in the interior. This DIY computer desk with LED backlight in an ordinary garage, see the step-by-step photos for details.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Schemes and drawings of linear computer tables 100 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Corner computer tables

Do-it-yourself corner computer desk

The corner of the room can be a very useful place for a computer. If you are looking for a suitable option for a small room, then do-it-yourself corner computer desk is not a bad decision. The area of ​​such a design is larger than that of a rectangular table and, in terms of functionality, the angular version also wins.

The photos show step by step how to make a typical corner desk for a computer with your own hands. The circuit can be changed, as you can see, the design is practically without add-ons, so you can use examples of other models.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make an inexpensive computer desk

Highly a good option for a computer table, practically does not take up space, height can be made at one’s discretion, great depth, there’s even a place where to stretch your legs. For a countertop, you need to buy a chipboard plate 60 cm wide or use a countertop from an old table. The system unit is attached to the wall with special brackets, also under the tabletop, install the outlet block. Shelves above the table at your discretion, you can one tier, you can three.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself ergonomic computer desk

Ergonomics of the desktop computer plays an important role for health. It is not so easy to choose a table that will fully satisfy your comfort, moreover, the more complicated the design, the more expensive the model. Of course, not everyone knows carpentry, but make an ergonomic computer desk do it yourselfAbout the newcomer, the main thing is to collect more information and draw up a smart plan.

This table in the photo is made by yourself, although it looks like a factory model. The main thing is to decide to start, look at the stages of work and for sure everything will work out. Of course, accessories and parts can be expensive, but if you take into account the time and resources saved in other areas, they are "worth" the investment.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

High corner computer table

Sometimes a corner in a room is the only place where you can attach a table for a computer. The choice is difficult, but how do you like this idea of ​​high computer desk on the legs of water pipes. In my opinion, original and convenient. You can work with a computer without sitting in a chair, so to speak, along the way. If you liked it, look at the photo how to make it.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Large corner computer desk

How do you like that option of a large computer desk, fits as many as three monitors. Sounds like a flight control center. If you love online games and make money on the Internet, you should like it. The table is designed for three system units, a printer, a mini fridge, two uninterruptible power supplies and enough space for additional peripherals, if necessary. Sems and manufacturing procedures in step-by-step photographs.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Schemes and drawings of corner computer tables 100 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Computer tables from pallets

Computer table for the bedroom of pallets

For this table, only one pallet and a piece of glass were needed. You can install a computer, put a laptop, or you can put nothing, use just like a coffee table. It is not very convenient to work with a computer on it, but if you urgently need a table, and even without any special costs, this is an excellent solution.

• 
• 
• 
• 
• 
• 
•  

Simple computer table made of pallets

The easiest option. Take three pallets, one that is better will go to the countertop, the other two to shelves and legs. Two pallets will need to be disassembled to make a solid countertop, it is better to fasten the boards not with nails, but with self-tapping screws.

As the upper part is ready, screw the legs flush. On the side we fasten the shelves for the system unit, and for something else, we saw off the shelves in advance from a whole pallet. Then we take the sandpaper and bring all surfaces to condition. Everything is ridiculously simple and you have a computer table almost for free.

• 
• 
• 
• 
• 
• 
• 
•  

Folding table of pallets

 

Sometimes, in order to fit all the furniture properly, we have to use every inch of free space. If you have such problems, then this folding table made of pallets will be an excellent choice for working with a laptop and computer.

As you can see, it folds easily, fastens to the wall, so it does not take up space at all.
Use the usual hinges and mounts, nothing complicated and the most functional table is ready.

 

 

 

 

 

 

You can work on it, use it for eating, and it is also a great way to provide adequate lighting for the walls of the house.

 

 

 

 

 

 

 

 

 

 

 

 

 

Steampunk computer table

You won't see the steampunk style in the interior today. This is understandable, although the originality and originality of this style is obvious, but not everyone will risk changing their interior in this way. See for yourself, such a steampunk-style computer desk really inspires respect, although it is a little daunting at first glance.

If you like original things and want to transform your interior, you can make such a computer table with your own hands.. This idea is to make a design with heavy fittings, switches on a wooden panel, an integrated system unit, speakers, LED lighting and other bells and whistles. The form is simple, but requires painstaking workhowever, in step-by-step photos, everything is displayed in quite some detail. True, here the author used a real ship's porthole for the viewing window, which, of course, is cool, if you can get the same. The assembly consists of two parts, this is the first.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

In the second part make the second half. The table consists of two parts, each of which contains its own complex: one speaker, one display and dashboard. From a technical point of view, both computers in separate cabinets, although you can switch them to one remote control, and use the second to control other equipment. For each half went on six pallets.

The design is very bulky, so think carefully about the installation location. The most important part installation of the filling of the computer in a home-made system unit, you can’t write down everything here, you just need to know your computer’s device well. The interior lighting in the lower cabinets can be made through copper tubes. In general, you will have to tinker with wiring and lighting, there is a lot of work, so you have to be with a soldering iron on "you". But there is everything: rotary switches for a stereo amplifier and two monitors. Upper The voltmeter shows the operation of the amplifier. Lowervoltage for a plasma ball. Switches with illuminated power indication for the built-in monitor in the cabinet, desk lamp. Red bottom right: Power for the two connectors on the table. In general, there is a lot of work, the author took two weeks to complete the projectbut he didn’t have step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Original ideas

DIY computer chest

 

The original idea of ​​a computer table. Of course, working for him for a long time is not very convenient, but it has its advantages, it takes up no more space than an ordinary bedside table, easy access to all equipment and safe for small children. And one more big advantage, low costs for its manufacture, so much went to this table.

 

Not bad, huh? Do not buy at the store at that price, let alone the original design.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Author Kuzmin Roman

 

Desktop with integrated computer

A computer, a wonderful thing, today without it anywhere, but the system unit, a cumbersome thing, plus wires and all that. I searched the Internet for what people came up with to optimize their workspace. I found this idea integrate the system unit into the table, Good idea. Below are step-by-step photos on how to implement this idea.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY home office

It is no secret that working while sitting, blood stagnates in hemorrhoidal nodes and the risk of osteochondrosis increases. In general, there are many theories proving why working at a computer is better standing. If you are a supporter of such an idea, then this computer desk will help you.

The design looks very solid, everything is provided for work at home, but do not be alarmed, it is made with your own hands and you can buy all the details in a furniture store. Accessories are also not cheap, but open any catalog and see how much a table of this size will cost in the cabin, if you still find the right one.

You can also add adjustable legs at the bottom of the main bookshelf to raise the entire table to the required height, or install wheels to the bottom. Black and brown finish is the most popular, this is when you pick the color.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

Stands for the computer on the desktop

Any desk can be made computer, if you do just this stand for comfortable work. The finished stand is 70 centimeters wide and 30 centimeters deep. The design is easy to change and allows you to adjust the keyboard and shelf height for the monitor. The standard shelf height for the monitor is 35 centimeters and the standard keyboard height is 23 centimeters. Such a thing can be done in one evening with your own hands.

• 
• 
• 
• 
• 
• 
•  

 

Desk

Small desk

An example of a very simple little desk, which can be done with your own hands without much difficulty. Minimalist style with a rustic slant. Look at the step-by-step photos, the design is no more complicated than that of a stool, even drawers are not provided.

Instead, you can use metal boxes or even wicker basketsif you prefer a rustic style. Indeed, it is very simple and original.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY wooden desk

So-so rustic style, rural spirit add crossed sidewalls, and so quite classic table. Reliable design, convenient location of drawers, accessories as in the photo to buy is not a problem. Still need Kreg jig, an indispensable thing for carpentry, are used to make "pocket" holes especially for those who often connect wooden parts at right angles. In a nutshell, this tool allows you to drill holes at the right angle to create a reliable connection.

There is no need to mess with complicated methods such as spikes and the like. And you can drill holes on the inside of the board so that they will not be noticeable. I don’t want to advertise, but it’s really a convenient thing.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself classic desk

It looks solid, right? And this photo is not from the furniture catalog, you can really make such a classic desk with your own hands even without special skills and with a modest budget. Of course, it cannot be done in one evening.

You also need a special tool, accessories, but, in my opinion, such a thing is worth the time. I hope the photos help, the steps are taken in some detail.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Designer desk

The design of this desk was developed by the famous in the early twentieth century. architects Charles and Henry Greene of California. But even after a century, the model looks quite modern, a stylish thing, it will be stylish in a hundred years. You can make such a designer desk yourself. Below are diagrams and step-by-step photos

There are many nuances that are shown in the drawings, so the work requires great accuracy. Schemes from English sites to convert the inches indicated in the drawings to centimeters, multiply by 2.54

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Desk from an old chest of drawers

Shown here how easy it is to make a desk from an old chest of drawers. Of course, if you have an old chest of drawers. In principle, everything is clear, you need a countertop. By the way, if there is an old table, then this whole thing can be combined. In this case, as you see in the photo, a countertop of the corresponding size is made and legs are added.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Large wooden table do it yourself

The main advantage of this particular table is that it construction will be relatively cheapjust need to stock up on wood scraps. The blanks should be selected approximately the same size, the remaining parameters, in particular, from which wood these blanks will beit doesn’t matter.

The idea, I think, is understandable, you glue the prepared scraps, fasten them with screws and bring the formed countertop to condition, in step-by-step photos the whole process is in full view. Pay attention to double legswhich are attached to specially nailed planks and long threaded metal tubes.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself long desk

To make a long desk, it is not necessary to buy the finished product, in the store you can buy tabletops separately and assemble the design of the dimensions you need. Presented here do-it-yourself three-meter table on three legs.

• 
• 
• 
• 
• 
• 
•  

DIY built-in table

The size of the table area, this, of course, is not for everybody, it is presented here as make a built-in table with your own hands three and a half meters long. If you need to save space in the room and money, this is a good solution. All that is necessary is to make reliable fasteners, and there will not be any special problems with the countertop.
The concept is simple, the supports are attached to the wall and the top block is mounted on them. There are a few things you need to pay attention to. First of all, in this case, the countertop consists of three parts, that is, there will be seams to be treated. Secondlycountertop needed fasten to the wall along the entire lengthso that there are no shifts.

• 
• 
• 
• 
• 
• 
• 
•  

DIY folding desk

Good a way to save space, make a folding desk with your own hands. There can be many options; here, in my opinion, the simplest one is presented. Three hinges on the countertop and two on the lower horizontal support brackets.

 

Now consider a way to fix the tabletop to the support bracketso that it does not move when the table is in working position. Need wooden peg. Drill a hole in the upper part of the triangle, fill with glue, insert a peg into it. Drill a hole the size of this peg at the bottom of the countertop. Everything, the latch is ready

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY folding desk

A very convenient design for the workplace, everything you need is at hand, and when it is not needed, it folds and fastens to the wall. The system is simple, the table is held with a hook and an eye. In a couple of hours, of course, this design cannot be made, but you can simplify the cabinet if you do not need so many shelves and drawers. The assembly order is shown in the diagrams in step-by-step pictures.

• 
• 
• 
• 
• 
• 
•  

Writing desk from the pallet

For those who are looking for the most cheap optiontIt is worth remembering the pallets. Furniture made of pallets, the topic is relevant, you can really make interesting models. For example, like this desk from the pallet, all the work is to attach the legs, and of course, bring the pallet into a salable condition, that is, sand all external surfaces and coat them with varnish.

• 
• 
• 
• 
• 
• 
• 
•  

Folding desk

The design of the desk is based on simple rectangular frames on both sides, and crossbars that tighten the sides. The worktop is supported by steps that are mounted in recesses on the frame. A very simple design, but special attention should be paid to the methods of fastening nodes.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here is shown in more detail, in diagrams, with all sizes

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Small table with open drawers

 

Simple model of a small table for a small room. The assembly order is shown in the diagrams, simple and affordable, just remember to translate inches to centimeters, although in this case, the dimensions can be set as you wish. The design is simple, so that a table can be made and twice as much.

 

 

• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself wooden gantry table

 

By the way wooden gantry table is very popularmainly among lovers of rustic style or retro. Moreover, the design is reliable and, as you will see below in step-by-step photographs, making it yourself easier than classic models. True, there are several nuances, but you can cope with them, just follow the plan.

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

The design of the gantry table in a modern design looks very stylish and is often used by designers in interior design. In this small selection you can appreciate a few examples of such tables.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

French table

How do you like a french table? It is a pity that there is no natural photograph in the interior, but even in the picture it looks quite stylish. The table has two narrow drawers and one deeper, plus decorative brackets. Beautiful and functionalWhat more is needed to fit into any interior! A good option for a novice master, see the assembly procedure in step-by-step diagrams.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Simple desk with drawers

 

Another version of a simple table with step by step schemes in pictures.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Simple wooden table

If you want to do something with your own hands, but no experience or ideas, start with simple desk. Be patient, and these schemes in step-by-step photographs will help you. Take the first step - buy materials, then you will not have a return trip. If you don’t want to spend too much, then briefly: the cheapest Chipboardbut this thing is environmentally harmful MDF - A little more expensive, but will last longer and less dangerous to health.

• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY office table

The design is not as complicated as it might seem, regular table with a large drawer and a small superstructure. Bureau on the countertop can be done at your discretion, if you are comfortable with this option, step-by-step photos show all the stages and sizes of parts.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a do-it-yourself drawer for your desk

Look at the step-by-step photos and you will understand that there is nothing complicated. Here a very simple method is used to secure the joints. Just place the block in a corner and lock it firmly to each side. This will help keep drawer parts when inserting and screwing pocket screws through holes. After all four corners are assembled, check that the structure is square in shape.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Another option, how to assemble a desk drawer and install tensioning. In the manufacture is very important calculate sizes accuratelyIf the shape is not strictly rectangular, the box will simply not function. There are different ways of fixing the walls, in this case it is presented butt joint. Maybe not the best option in the decorative plan, but simply and reliably. The front wall is usually mounted on the front of the frame. Remember, when buying materials, buy a slide rail first, only after that start to make a box. Also decide on the guides, the easiest way is to nail wooden slats. But there are always problems with them, the tree is drying up, changing shape, especially with high humidity, then the box is stuck in grooves, in general, a familiar situation. Therefore, it is best to buy metal guides. Today you can buy three main types of guides: telescopic, roller and with a finishing mechanism. The best option for a desk is telescopic guides of full promotion. Best in terms of price and quality. In size, they are produced in multiples of 50, usually from 250 to 600 mm. Of these sizes, you can also calculate the length of the drawer. Remember to make markup and make sure that the guides did not protrude beyond the dimensions of the box. Then simply fasten it with self-tapping screws through the factory holes.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Plywood desk

This a desk made of laminated plywood has a lot of advantages. First of allthe surface is hard to scratch Secondly, the plastic component of the surface does not allow liquids to be absorbed, so if you spill tea, or what you prefer, drink at work, you can not worry at the table. And most importantlyusing a special strap the tabletop can be installed at any anglethat agree, it is very convenient for work. A special groove is made along the edge of the table top, so that objects will not roll to the floor when tilted.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Window sills

Everyone has windowsills, but not everyone knows about all the possibilities this interior detail can provide. It turns out this is not only a place for flowers or a porch for a cat, from the windowsill you can make an excellent desk. This will not require much effort, but there are many advantages. First of allwhich space saving, Secondly, energy saving, because a table lamp will be needed when it is already completely dark, and in the afternoon the table will have excellent natural light from the window. True, most have a heating battery under the windowsill, so you can’t stretch your legs far, but there is a plus, they will not freeze.

DIY window sill

These photos are a good example, how to make a do-it-yourself window sill table. The photos are a bit of poor quality, but the overall process is displayed.available. In fact, you can’t do without creativity, window sills, they are also different, but the point is what size are you going to make a countertop. It depends on this whether additional legs are needed or not, and then you decide how you will install the countertop on the windowsill, under it or instead of it.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Table sill with metal legs

 

One more sill table option do it yourself, only with legs. In this case, it is more appropriate, since a narrow heating battery is installed. The process of manufacturing and installing the table, see the step by step photos. By the way, so that the hot air from the radiator circulates normally, do not forget to small holes in the countertop.

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Corner desks

Classic do-it-yourself corner desk

Consider the steps how to make a corner table do it yourself. This is not so easy, but this form of design will create more space in your room, and it is certainly cheaper than buying ready-made. But there are a few nuances that you should take into account. It is necessary to carefully calculate table size and designso that it fits your needs and naturally buy quality materials.

• We start with the manufacture of countertops.
• The next step is attaching the frame to the back of the table.
• Then we make blocks for shelves.
• We fix the lower bar.
• We make and install the bottom drawers.

This is for short

• 
• 
• 
• 
• 
• 
• 
• 
•  

Large corner table

Here are step-by-step photos, how to make a large corner table with your own handsor rather long. As you can see, the table really has a large area, but the center of the room remains completely free, however, it is advisable to buy a chair on wheels with such a table. A concrete design, you can not only write, but also to use for chores.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Do-it-yourself desk

We continue to save space, how do you like hinged desk? How to make it yourself? Make a drawing, find suitable boards, drill three holes for fastening with side bars. Screw the bars to the bottom of the table with screws. Attach the brackets to the wall and install the countertop on them. Something like this.

Photo from www.designsponge.com/2008/04/diy-project-maggis-minimalist-oak-desk.html

 

Compact do-it-yourself desk

Someone suffers from gigantomania and dreams of huge three-meter mahogany tables, but this note is not for them. Here, step by step photos show how to make a small compact office table, to most conveniently place different documents, folders, stationery and at the same time take a minimum of space. Also presented is a diagram with dimensions.

Assembly steps

• 
• 
• 
• 
• 
•  

Desk from an old door

If you really want to save, then save big :) In this case, and old double door come in handy, because this is almost a ready-made table. It remains to order or make a frame with legs with your own hands. Then a little imagination, a couple of strokes and an unusual table is ready.

80 photos of diagrams and drawings of desks

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Coffee table

 How to make a coffee table with your own hands

Such a cute table will decorate any living room, stylishly and without complaints. A great option for a beginner joiner, you do not need any drawings, no diagrams, and most importantly, minimum costs. To make a similar coffee table with your own handsneed hardboard sheet and three or four legsthat can be bought at a furniture store.

 

Use a centimeter on the sheet to find the center point. It's simple, draw two diagonals and mark the intersection point.
Then drive a carnation and fasten a thread or a thin rope to it, a pencil on the other end. Thus, you define countertop shape. If you want to make a table with a round lid, then the layout is ready. If you want to make an original shape, part of the circle can be cut to form a figure that looks like a bean. Then simply cut out the countertop, peel, paint, and finally fasten the legs. You can choose places for them at your discretion, the main thing is that the table does not stagger.

• 
• 
• 
• 
• 
• 
•  

Country wooden coffee table

If you like a simple, rustic style, then this table is for you. It looks a bit massive, but this matter of taste, in principle, can be corrected. For making a coffee table with your own hands will need Craig Jig, an extremely handy piece for carpentryIf you decide to start manufacturing wooden furniture, you can’t imagine the best device for joining wooden parts at an angle. Further assembly order, see the step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

The same option, only a rectangular shape

 

 

 

 

 

 

• 
• 
• 
• 
• 
• 
•  

Schemes how to make a coffee table with your own hands

If you decide to make a wooden coffee table in this style, you can use these schemes in step-by-step pictures. Fundamental rules: measure seven timesWell, then you know; do mounting holesto prevent wood from splitting; allow the connection to dry properly during few hours.

• 
• 
• 
• 
• 
•  

Super simple do-it-yourself coffee table

Even if you’ve never done furniture before, just cope with such a project. It is necessary to cut a plywood sheet to the size, then four legs from the bars, make a bevel on the end of each leg with a face saw.

 

Then make holes at the ends of all four parts, as shown. Similar details should be made differently depending on where they are located, as in this case with legs for a coffee table. To avoid confusion, arrange the parts as they are oriented and mark with a pencil.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Rustic high table

A good thing, for an amateur, of course. It looks especially original in a modern interior, in contrast with expensive furniture. The step-by-step photos show how to assemble such a design, almost the same as a stool, with only some design features. Don’t be afraid of the cross sides, it’s just a decorative element, they do not hold anything, so that they can even be put on glue, well, and fix a couple of cloves.

 

 

• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY carved coffee table

No, this is not an exhibit from the furniture museum of the last century, this chic coffee table made by yourself. Further on the step-by-step photo shows how it is done, all the steps, from curly legs to a countertop with beautiful weaving for ventilation. By the way, the decorative relief on the legs was made with an ordinary knife, which indicates the undoubted talent of the author.

Do you think this will not work? If you don’t try, then you won’t know.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Goat Coffee Table

This kind of legs for coffee tables are usually not used, but your room will look more original. A sort of Mediterranean style will add color to any living room. According to the presented schemes and step-by-step photographs, it is clear that it is not so difficult to assemble such a coffee table, and most importantly, you can use improvised materials, so You can also saveb.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Coffee table with shelves

Beautiful coffee table with shelves, simple and functional. The stiletto heels give it lightness, and the convenient shelf adds solidity. But most importantly, it is easy to do it yourself, and if you still know how to handle a drill, then this is generally a couple of trifles.

The assembly itself will take two hours, just before that you need to prepare materials, this will take most of the time.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Large coffee table for the living room

A good option for a spacious coffee table for the living room. If you like, step-by-step photographs in diagrams with dimensions show the entire order of work.

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Round table coffee table

This coffee table is built from recycled and antique materials for the weekend between lunch and dinner. When using parts from old furniture, check the materials for cracks and any other structural damage. For this table of new materials, you need a sheet of plywood to attach four legs, you need to cut four triangles, you can from the remains of plywood. Choose your own finishing method, because it depends on the parts of the furniture that you will use.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Source www.diynetwork.com

DIY folding coffee table

Coffee tables in the interior play mainly a decorative role, as well as a stand for flowers, periodicals, well, or drink coffee in front of the TV. But working with a laptop is not very convenient. To solve this problem I suggest variant of a folding table, this one, for example, is made of a regular tool box. The whole chip in a simple mechanism, in this case it is made of wooden blocks, you can use a metal corner or pipes. It is very convenient not only because it raises the countertop for comfortable work, even under the lid you can store various trinkets.

• 
• 
• 
• 
• 
• 
• 
•  

Raised top coffee table

Rate the model upgraded coffee table with lifting top and legs in aluminum. The lifting mechanism allows you to raise the countertop to the ideal height for working with a laptop. Or if you want a snack in front of the TV. True, to make a lift, you need welding orwill have to order.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 Coffee tables from pallets

DIY pallets table

Starting to think about saving, immediately remember the pallets. To make such a coffee table, you will need a sheet of plywood, a wooden pallet in a more or less decent condition and a stain. The main costs are to order a metal frame with legs, although such a simple design can be made of wood.

• 
• 
• 
• 
• 
•  

Coffee table from a pallet on metal legs

An exclusive coffee table made of pallets fits perfectly into the interior in eco-style. Make it easy, it does not take much time and does not require large expenses. In addition, it will save money and provide an opportunity to show your creative imagination. Most importantly, you can be sure that there is nothing like this in other apartments. You can put a table next to the sofa and store magazines, books, and a TV remote control on it.
Pallets are different. They differ not only in quality, but also in the distance between the boards.. For this option, the pallet must be disassembled, and then beat on a new one so that they fit snugly against each other. Or splurge on a sheet of plywood.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Source dizainall.com/sdelaj-sam/how-make-coffee-table-from-pallets-diy

Coffee table with pallets on casters

With the manufacture of such a coffee table, you will definitely not have problems. In principle, step-by-step photographs are not needed here. Just take two pallets and modify them a bit. One part needs to be removed, from the remaining boards you make the bottom shelf solid, that's all. It remains to process, paint, screw the wheels.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Wooden table coffee table

The most difficult part of making a coffee table from wooden drawers is finding wooden drawers. Sanding and varnishing, I think, is no problem for anyone. It remains to combine all this into one design and fix it on a plywood sheet. Comfort lovers can still go broke and buy wheels in a furniture store.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Interesting ideas for coffee tables

Unusual do-it-yourself coffee table

Really unusual. If you can argue about functionality, then you definitely can’t take originality from it. There is another plus, making such an unusual coffee table with your own hands is not at all difficult. Do you want yourself like that too? In step-by-step photos there are diagrams with dimensions and assembly order.

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Wooden barrel coffee table

 

So, we continue to search for interesting ideas. Shown here how to make a coffee table from half a wooden barrel. The task is not simple, not in terms of technical solutions, but rather in terms of labor intensity. First, do not just split the barrel in half and save all the details. Then, you need to calculate the base for the table well, the easiest way is to make an opening tabletop.

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
•  

 

 

 

 

 

 

Do it yourself coffee table

Original mobile table on casters. It will take four thick 5x5 bars, 12 pieces of plexiglass 100x10 cm, a meter-long sheet of glass thicker, the same size three sheets of plywood, four metal rods, wheels and 28 small wooden cylinders. What to do with all this set, look at the step-by-step photos, there are already 57 of them, so you can make out everything in detail.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kruglyash coffee table

This coffee table very easy to do, most importantly, find the right material. But easy doesn’t mean fast. If you use a freshly sawn round log, you need to put it in a warm place and wait, at least two weeks, until it dries. There is no need to rush the process, the faster it dries, the more cracks will form on the surface. Then there will be tedious work on thorough surface treatment, but in principle this is all, varnishing and attaching legs is no longer a problem.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Birch log coffee table

Birch is an excellent material and can become the main element of any interior design. It radiates warmth and lightness, and can serve for various purposes: you can make beautiful candlesticks, use branches to create a natural organic wall background or, in this case, make a beautiful simple coffee table that is perfect for your home. This project took 34 birch logs with a diameter of about 10 centimeters. The result in the photo is a clean, neat rustic but elegant coffee table. You can look at the master class in step-by-step photos.

One caveat to fill the empty spaces that remained between the logs, add grout over the entire surface and rub the surface. Use a spatula to remove excess grout from the coffee table and allow it to dry well before continuing.

• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

FROMHemas and drawings of coffee tables 100 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

Children's table

DIY table and chairs

How to make a children's table with your own hands

A very simple option, with these step-by-step photos you will learn how to make a kids table with your own hands. The dimensions are not indicated here, you can determine it yourself, let the child put his elbows on the table and reach his temples, his back should be straight. This will be the optimal height for your table.

 

If you want to approach the question correctly, use the table.

The manufacturing process is shown in sufficient detail, so if you have the necessary tools, it will not take much time.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Children's table with shelves

You can make such a table with shelves yourself, especially without ruining the family budget. If your children like to draw and do needlework, shelves are very useful. therefore the idea of ​​making a table in a cabinet is very functional. How to make such a gift for children, look at the step by step photos with the indicated sizes.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY table and chairs for children

Each parent wants only the best for their child, but the best is usually the most expensive. Design your own nursery, which could be better than DIY table and chairs for a child. This kit is made of disassembled pallets, even a photo is attached :). Therefore, in material terms, the project is very profitable, and how to make it, look at the phased photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY baby chair

If you are busy with a table, you need to know how to make a baby chair with your own handsOne cannot exist without the other. So what should it be? Not expensive lightso that the child can calmly lift it, enough strong, because it is unlikely that children will sit on it calmly, well, and beautiful. This is exactly the option that is offered in these photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Children's table with side shelves

 

An interesting solution, and perhaps the easiest option for self-made children's table. Two mini cabinets with shelves and top countertop. It is designed in size so that the child can work behind him, if necessary, you can make a high chair. Take a look at the step by step photos and make sure that it is really very simple.

• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself folding table in the nursery

 

 

 

 

 

 

 

 

 

Folding table good solution for a small children's room. This table, when closed, does not take up space, and can also serve as a blackboard for playing school. In the open, it is ideal for children, you can write, draw, there is a place to store art supplies.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Long table with drawers

If space permits, you can make such a long table with drawers. Do not buy a similar design in the store. The main task, firmly fix the countertop to the wallbelow in the gallery with step by step photos you can see how this is done.

The rest of the details, in this case the iron bins of the bureau, can be bought, they serve for various purposes, including an additional support for the countertop.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself long gaming table

A table for three children from 3 to seven years. Convenient and simple design, not only for children, but also for parents. Side supports are small cabinets, here plastic shelves are used as shelves, you can replace them with wooden or cardboard. An interesting idea with buckets on the top shelf.

• 
• 
• 
• 
• 
• 
• 
•  

 

How to make a table and chairs for children with their own hands

This kit is just perfect for the kids room. Below is a master class, how to make a table and chairs for children do it yourself. Although the kit is painted white, you can color it to whatever you like. The tabletops and corners of the chairs have rounded edges so that the kids do not accidentally stumble and get injured. Height suitable for children aged 2 to 8 years (depending on size). The chairs have beautifully carved hearts in the backs, which are repeated in an apron around the table. According to the author, construction is very strong and reliable. Below are step-by-step photos of the master class for making the kit.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cardboard table for a small child

This table for a small child made of cardboard and it won’t cost you anything. Lightweight, portable and great for small children. Your children will be able to write, draw and do their favorite activities while sitting comfortably on the couch. It will also help keep the sofa clean. This is a very simple but practical piece of furniture that you can make for your little ones. All you need is a few cardboard boxes, why throw them away, it's better to do something useful.

• 
• 
• 
• 
• 
• 
• 
•  

Small picnic table

Such You can make your own picnic tableand in a couple of hours, children will surely be delighted. Parts can be ordered in furniture stores, or made independently, if possible. Assembling the frame is not difficult even for a novice master, look at the photo how it is done.

• 
• 
• 
• 
• 
•  

 

Decorating a children's table with colored tape

Of course there are many ways how to decorate a children's table, in this case, you can fantasize to the fullest. Same way decorating a children's table with colored tape I liked its originality and simplicity. See how you can make a tic-tac-toe field out of a countertop. Figures (tic tac toe) can be made of cardboard.

• 
• 
• 
• 
• 
• 
•  

Schemes and drawings of children's tables

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

View the embedded image gallery online at:
https://i.expert-h.com/en/stol/stol-svoimi-rukami-iz-dereva-foto-chertezhi-master-klassy#sigFreeIdd92b05b21a

DIY desk

How to make a children's desk with your own hands

The workplace of a student is a serious matter. There are many nuances that must be considered so that the child feels comfortable and does not harm his health. You you can make a children's desk with your own handslike this versatile model with adjustable options. Firstly a little saveand then, who apart from parents knows best the individual characteristics of their child. The photo in the gallery shows the diagrams, manufacturing order, front and side views.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Children's desk with a bench

Like this you can easily make a simple school desk with a bench with your own hands. True, no adjustments are provided here, but this is offset by the ease of manufacture. The diagram is shown in step-by-step photos, the dimensions are in inches, but you can easily translate their centimeters, multiplying by 2.54.

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

School desk with drawer

Initially, this model of an adult table, like a bureau. But the author suggested use the model as a school desk, slightly resizing. In my opinion, it turned out not bad, such a stylish desk and can perfectly serve as a school desk. It is important to deploy 3mm hidden guide holes when connecting sections to each other. You will also need to reduce the angle on both side sections. Height of backrest 210mm and front side 102mm. Draw a line from the back wall to the front and saw off with a jigsaw.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself home school desk

You can consider this home desk optionsimple but tasteful. According to the author, this work of joinery craftsmanship (by the way, made of natural wood) took eight days and only 1,500 rubles. Compare with the store price. See step-by-step photos below, as you can see, it’s quite possible to do everything yourself.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself desk and plywood highchair

The growing school desk has a lot of advantages, the main, of course, taking into account the age and physiological characteristics of the child, which allows you to maintain the posture and vision of the growing student. Well, the design and dimensions are understandable, it saves precious meters and will look great in any children's room. Here is a growing school desk and a stool made of plywood, which you can do yourself. OptiNest can be used to create curved parts. With this program, you can significantly save materials.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

School desk

Classic desk for a student

 

Offered version of a simple desk for a student in a classic style. Although today many people prefer more modern options, with various mechanisms and devices, this is a matter of taste. But classics are classics, especially since a person with minimal experience in carpentry can make such a table. Step-by-step photos in dimensional schemes will help you.

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Desk for a student in a small room

What does a teenager need? Let your little place, your little table, but your own. Moreover, not every apartment can have a large table. It offers the option of a small workplace for the student, equipped under the window. A cozy desk for a student in a small room, with shelves and everything necessary for normal operation. How to do it yourself, look at the step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Photo by ceskykutil.cz

DIY large desk

If there is room, you can do do-it-yourself large desk. The model is made of furniture panels, inexpensive and convenient. The design consists of two blocks with a countertop and shelves fixed between them. Note, the tabletop protrudes a little, so you need to strengthen itb, children nevertheless, they can climb onto the table. See assembly procedure below for step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Original do-it-yourself desk for a student

An original table is suitable for both five-year-old kids and elementary school students. A very convenient and functional design in the form of a house fits perfectly into the interior of a children's room, practically does not take up space when assembled. During operation, the folding tabletop is fixed on the open doors, in placeBookshelves and notebooks can be stored on the shelves, and writing and drawing facilities are in the upper bureau.

• 
• 
• 
• 
• 
• 
• 
•  

DIY do-it-yourself chair

Perhaps, that the child should have correct posture, parents do not need to be reminded once again. Office chair with adjustments for a student is not suitable, the best solution is make a growing chair with your own hands. There are many options, you can see by looking on the Internet. but step-by-step instructions, unfortunately, are much smaller than the models presented. Maybe you will like this option, in the photo. The design at first glance is simple, but there are many nuances. For the design to be solid and stable, it is necessary correctly calculate the ratio of the location and size of parts. A diagram of the size you need can be found on the Internet, look at this link yadi.sk/d/-nS9on3WmbxdF, and see the assembly order in step-by-step photographs.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Schemes and drawings of desks for a student 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

 

Table transformer

 

 

DIY picnic table transformer

Option 1

 

Picnic, the event is episodic, so it is convenient to use furniture that is easy to fold and transport. There are different options, an example is shown here, how to make a transformer table for a picnic with your own hands from inexpensive materials and in a short time. In fact, these are two benches, which, if you move together and turn the backs, turn into a comfortable table. No complicated secret mechanisms one bolt serves as a swivel joint, the second bolt serves as a retainer. Everything ingenious is simple.

Another remark, the width of this table is 1.20 m, it is purely out of cost, although most adults are 1.80 m in size. You can make the table longer adding supports. See step-by-step photos and diagrams, there is nothing complicated in the assembly.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Option 2

 

This picnic table transformer option is a bit trickierbut the principle is similar. A comfortable table turns into two pretty benches. It differs in the way of fastening and the shape of the benches, as you can see, here the fastening of the countertop is overlapping, if this method is not very convenient for you, can change the size of the table cover. See assembly steps for step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY folding table

Very simple portable design, can be used as a table for a laptop or as a children's table, in general, a useful thing. Unlike a regular table, it can be easily folded in half and, while there is no need, put it in a secluded place.

It’s convenient to use a table, at a pressure above the halves do not separateIn addition, a carrying handle is provided.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a table transformer type "Acrobat"

What is the Acrobat system? it original multifunctional mechanism, which, unfortunately, is not on sale, you can only buy a ready-made table with this mechanism. The step-by-step photos shown here show how to make a transformer table type "Acrobat", that is, a mechanism as similar to the original as possible. The advantage of the design is that it has several options for transforming countertops, as well as several fixed height positions. See below the master class on how to make a table with your own hands.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Table transformer on a gantry

An interesting version of the transformer table on the gantry. A little rude, but it’s so conceived, deliberate simplicity only emphasizes the style of the table. But the main thing is its accessibility. You can make a table with your own hands from inexpensive and simple materials and you will not need expensive equipment for this.

Below are step-by-step photos where the manufacturing procedure is schematically shown, dimensions in feet (1 foot - 0.3048 m).

• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself transformer coffee table

 

 

 

 

 

 

The main purpose of transformer tables is to save space, so they are ideal for small rooms. As you see, this option fits well with the Khrushchev’s environment. To make a coffee table a transformer with your own hands, first of all, you need a transformation mechanism. Of course, it is theoretically possible to do everything, even a special mechanism, but it’s easier to buy it all the same, and to do the rest already. That it is real, look at step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Computer table transformer

Many people prefer to work at a computer table while standing, for various reasons, mainly, of course, because of health, long sitting contributes to the development of various unpleasant ailments. Modern manufacturers, of course, monitor the situation, so buying a special desk is not a problem, but you are unlikely to buy a good transformer computer desk for less than half a thousand dollars.

Therefore, we propose to make such an original version with your own hands. As seen in the photo, counterweight counter, with which you can adjust the height of the countertops. As you can see, the scheme is not complicated, but at the final stage it is necessary to carefully adjust everything.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself multifunctional transformer table

An interesting table, found on two sites. True whole process, how to make a multifunctional table do-it-yourself transformer shown in the schemes and with captions in English, but the photos are more or less clear. If anything below under step-by-step photo links to sources, Sothat details can be clarified. The design was developed in Fusion 360 to simplify the work, there you can also design the mechanics for the table. What makes the project attractive, no extra frills, transformation is carried out in almost one motion. In general, if you like comfort, it's worth a try.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Table bed transformer

Almost any furniture can be turned into a table - a cabinet, a sofa, even a wall shelf, so why not make a do-it-yourself bed transformer table. Here, for example, a good design, consisting of the frame of the bed frame and, accordingly, the countertops. In addition, if you earn some money, you can also attach a second tier or a cabinet, which is also convenient. Below is a diagram of how the transformation occurs, but the assembly process in step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself transformer chair

Classical design of a chair that can be easily transformed into a convenient stepladder. There are different options on the Internet, this one made of plywood may not be the easiest, but cute, I liked it and the step-by-step photos are quite detailed. Used here folding method, that is, all from one workpiece, when the drawing is made in full size. The whole point is that grooves are cut in the details, the vertex will be on the other side of the machined surface, and it turns out, as it were, a drawing in natural form. Then glue is applied or adhesive tape can be used, so that after the holes have been made, the workpiece will not need to be divided into separate parts. So based on this method, you can work with varnished parts, films based on plastic, etc. In general, I will not talk in detail about the folding method, here the article is needed and not small. And if someone is interested, write in the comments, I will tell in more detail :)

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Schemes and drawings of transformer tables

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Laptop table

 

Folding laptop table

Here is a great option - folding laptop table and not only. The thing is multifunctional and portable, you can use it as a tray, a coffee table or just as a place for a tea party. By the way, suitable to serve coffee in bed, this is a note for romantics. All you need is a plywood sheet, wooden planks, if any, an old picture frame, glue, nails and four leg bolts will do.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Trolley for laptop on wheels

To make such do-it-yourself laptop table appropriate equipment will be needed. Of course, the thing is comfortable, on wheels, the tabletop can be adjusted in heightso that you can work sitting in a chair or on the couch. The option proposed by the author requires accurate calculations, so the adjustable part slides along the grooves, so the grooves in the parts of the legs should perfectly match.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Presented here exact parts diagrams in inches (1 inch - 2.54cm).

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself standard laptop table

If you don’t have your own design idea yet, here diagram of a standard laptop table, you can take it as a basis, individual details can then be finalized as you wish. With the worktop, everything is clear here, but to fix the legs, attach the hinge to one end of each leg. Place your foot on each corner with a wider surface facing the outside. Attach the hinges to the countertop so that when the leg folds, the hinge is sandwiched between the leg and the top, and the leg is flush with the sidewall.

• 
• 
• 
• 
• 
•  

DIY folding table for a laptop

Such it is not difficult to do a folding table for a laptop with your own hands and you will not need a lot of materials. Below are shown drawings of countertops and legs, as well as a unit for fixing and adjusting the countertops. The angle of inclination is adjustable plastic window latch, which is fixed inside the frame - the main feature of this design.

• 
• 
• 
• 
• 
• 
•  

Notebook table with cooling

A little table for a laptop is a good thing only if it is correctly made. The laptop has the property heat, many do not think about it somehow and over time it becomes an unpleasant surprise for them. But this is not such a problem. Look at the step by step photos as you can provide cooling to your laptop by slightly refitting the countertop.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Simple work table

 

This table can be for a laptop, or for anything else. It's just that the laptop is on the cover on the photo, so I decided to attach it to this collection. The design is very simple, adjust the height during manufacture to make it convenient to work with the keyboard, so you get a simple table for working with a laptop.

• 
• 
• 
• 
• 
• 
•  

DIY little laptop table

Materials to make this stylish little DIY laptop table went quite a bit and mostly only on legs. The countertop is redone from the old desk. The design only looks so fragile, in fact easily maintains the weight of the person.

Step-by-step photos of the master class are quite detailed, but as you can see, you need your own workshop.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Adjustable laptop table

Making such a table is not easy, as the whole the mechanism is made by hand. The coupling part is designed to adjust the height, with a horizontal emphasis on the upper part, which is mounted by a mortisewith spikes to the countertop and the lower part, fixed in the grooves on the glue. The adjustment bolts will need to be sized. However, it’s not so difficult, but it’s necessary to tinker, you can’t do without milling machine, circular saw and drill. Each step is detailed in step-by-step photographs.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Notebook table for standing work

Most of the tables for standing work are made on the basis of a metal frame, have an adjustment for standing and in the normal position. At home, few people use such tables, but sometimes a similar need arises. As you know, such models are very expensive. This laptop table for standing work is made by hand only of wood.

Of course, this is not the top of comfort, the usual high bedside table, but quite comfortable and pretty. In the right photo you see which design was used before. Not very convenient, right? The step-by-step photos show the work process, although the master is clearly not looking for easy ways, on glued grooves the construction is certainly more reliable, but you can do it easier on ordinary end connections.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a laptop table quickly and inexpensively

Everyone can make such a laptop table. You will need a small countertop, this is not a problem, you can find any stove from an old table or cabinet, six wooden slats, screws and screws. These holes, what you see, are more for beauty, well, and so that the design is not so heavy. Lock bolt made of nails, springs for handles and bicycle spokes. The table is compact, if it is not necessary, it can be folded and put under a sofa or on a cabinet.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Notebook table in bed

Cute laptop table in bed made of just two boardsconnected by glue. Still need six bars on the legs and bolts for connection. The holes for the bolts must be made large enough so that the legs can be conveniently laid in the middle, so there is not much space for storing the table.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Notebook table with lifting lid

Perhaps not an ideal design in terms of design, but all the technological features are provided for - a grill for ventilation, strap so that the laptop does not fall, folding legs. So in terms of functionality, it complies with all standards. A rail is fixed under the tabletop, a groove is drilled in it, and a groove is also made in the tabletop from the back side, where it is inserted metal bolt to hold the cover. A good option for a beginner joiner.

• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY laptop stand

Like this a music stand for a laptop can be made by yourself in a couple of hours. To do this, you need an electric drill, a hacksaw, and a little sandpaper. In this case, the thrust surface is made of plexiglass, although a regular sheet of plywood is also suitable. On supports simple clamps to change heightat the top tilt adjustment screws.

 

 

 

 

 

 

 

The stand can take any position, a convenient thing, and the design can be modified.

 

 

 

 

 

 

 

Bedside table for laptop

For lovers of comfort I suggest bedside table for laptop with wheels, which allows it to be used in the bedroom, living room or even outdoors. When you need to work late at night, which often happens to many of us, having such a bedside table, you can comfortably work in bed. For the manufacture you will need plywood, glue and ordinary tools, as you can see in the step-by-step photos, it will not be difficult to assemble the structure with your own hands.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY folding table for laptop

A compact wall-mounted desktop with a hinged lid that serves as a work surface for a laptop. You can make such a folding table for a laptop with your own handsIt takes up very little space, can be installed in a small home office or a child’s bedroom. When not in use, the lid is easy to close and can be used as a wall cabinet.

• 
• 
• 
• 
• 
• 
• 
• 
•