Giant flowers made of paper. Do it yourself, step-by-step instructions + 125 photos

 

The content of the article:

1. How to make a giant rose out of paper
2. Giant do-it-yourself paper flowers
3. How to make giant paper flowers
4. Giant Corrugated Paper Flowers
5. Big flowers from napkins
6. Big sunflower made of paper
7. Giant poppies flowers

Giant paper rose

These gorgeous flowers are easy to manufacture and super cheap, ideal for decorating fun parties, weddings, children's parties, photo props, tea parties, birthdays, Valentine's Day! Giant paper roses make it very easy and you need just two things: light paper and hot glue! Prepare 14 sheets, cut into large petals that take up almost all of the paper.

You will need approximately 5-6 sheets cut in half into petals and 1 sheet of paper for the center. Plus 4-5 sheets for leaves. So, approximately 25 sheets of paper per 1 giant flower! First the central spiral. Cut one sheet in a spiral, leaving the edges approximately 4 - 5 cm wide. Starting from the outer edge of the spiral, turn into a socket and fasten with hot glue.

Then cut out the smaller petals from the paper ... Just apply a strip of hot glue along the bottom edge of the petal. Press it gently against the bud. Allow to cool before making the next petal. Stick on all the big and big petals until they look right. Add some giant leaves along the bottom edge ... of course, with hot glue. A giant flower made of paper is ready. You can stick to the dowel or PVC pipe and make a giant bouquet!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Giant do-it-yourself paper roses

These giant paper roses were made to decorate the children's holiday.

Instruction can be read on the site, link under the gallery, there you can download template at the end of the post. It is designed to print on 30 × 43 paper for a large flower, but you can print on smaller paper for a flower of its size. The interesting part of these colors is hand painted polka dotswhich is easy to do with round sponge and paint, can be painted in any color according to your event. To make a giant flower, a combination of hot glue and a stapler was used.

These giant paper roses - An interesting way to decorate a party or create a backdrop for any event.

Giant paper flowers

Do you know what you can do giant paper flowers using your cutting plotter cricut? Here is one version, but you can use the same method to make the most different large paper flowers. So, you will need 8 sheets of cardboard 30 x 30 cm, cutting plotter and glue gun. First cut the blanks. Just move and flip parts until they fit.Then make a small cut in the bottom of each petal, as shown in the photo. The larger the petal, the longer the gap should be.

Repeat for all of your petals. Then roll up all the petals. Just wrap the ends around the pencil, as shown in the photo. Repeat for all petals.
NOTE: The largest three sizes form with curls going out. The smallest two sizes are formed in the presence of curls. Stack them in two different stacks so you don’t get confused when making giant paper flowerslike these.

Add hot glue to one of the ends and fold the petal. Repeat this process for all petals. Then just add hot glue to one side and fold. Hold by handuntil the hot glue cools down. Now you can form large paper flowers with petals. Start with the largest, use hot glue to hold the petals together. Then keep layering in size with using hot glue. Once you have all three of the largest sizes, set them aside. Assemble the smallest two sizes in the same way but on the side. Then make the next size and add the smallest to the center. Add this centerpiece to your flower. Your large paper flowers ready! Now you can add leaves on the sides, fixing with hot glue. Giant paper flowers - A great addition to a party or as a wall decoration in the bedroom. Whatever you decide, you will surely like that their very easy to do!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Giant do-it-yourself paper flowers

The best way to brighten up your party is to do giant paper flowers do it yourself, for example, such as in this photo. For this you will need cardboard, hot glue and tissue paper. From tools glue gun and vinyl or laser knife. If you want to cut by hand, of course you can, but make sure that you have enough time, manual cutting will take a VERY long time. If you cut flowers by hand, print patterns on whatman paper and cut one for each type of petal. Circle the template above the cardboard you plan to use flowers on and cut 8 petals of each size.

To make the petals look fuller, neat roll them into a pipestarting from the starting point and moving to the widest part. Unroll before gluing and the petals will be curved and look natural.

Start with a cardboard disk and one large petal. Put a small spoonful of hot glue close to the center of the cardboard disc and glue the tab pointed end. Then another small spoonful of hot glue on the tip of the first petal and glue another large dot of the petal over the first 180 degrees in a circle. Two flower petals should slightly overlap and stick out on opposite sides of the drive. Then you can fill in the remaining large petals, moving in increments of a quarter clockwise from the first petal. Each time, apply a small spoonful of glue to the point of the previous petal or next to it. This will create a center and keep the petals stick together to prevent folding. If necessary, you can add some glue. behind the petals on cardboard for added stability. The full version of the instructions, how to make giant flowers from paper, can be read on the website, link under the gallery. See below the master class on step by step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Giant Corrugated Paper Flowers

What about giant paper flowers?

For the manufacture you need 1/3 roll colored corrugated paper. You will also need about four glue sticks per flower and a piece of greenish crepe or material to use. as leaves. The corrugated paper grain should extend from the center of each petal to the tip, which will help to stretch the paper nicely as soon as you finish assembling the flower.

From the two largest sheets, cut the petals that are match the entire height of the paperwhile maintaining a maximum width of 35 cm. From a set of 32 cm wide, cut similar petals across the entire width in the center, but leave a distance approximately 4 cm from the edgesso that they are shorter than the petals 35 cm wide. You can use the lines on the paper as guides for cutting.

Reduce the length of each set of petals by the same amount. For the inner three petals, continue reduce width and lengthas for the others, but now they should be short enough so that you can fold the paper and cut several petals at the same time. In total you should have ten sets of petals. Next, how to make a big flower out of paper, Look at the master class for step-by-step photos. Detailed instructions can be found on the website.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Big flowers from napkins

Huge flowers can even be made from napkins.. You will need one pack of 8-10 napkins of the main color and 4 napkins for the central part. For each large flower made of napkins one piece of floral wire and tape are required. It would be useful to have a piece of paper on hand for create templates. Making a flower does not take long, how to do it is written in the detailed instructions on the site. Will also help you step by step photos below in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Giant paper sunflower

If you want to create the perfect fall decor, see how to make giant paper sunflower.

A layer of large sheets and smaller ones in the center, they should be same length and centered. When everything comes together, tie a green wire. Moving one layer at a time and working clockwise around the flower, fluff paper. The nice thing is that since they are so big, you can pretty quickly arrange decor at the autumn party. Sunflowers will look great as a background photo.

• 
• 
• 
• 
• 
• 
• 
•  

Giant poppies: how to make big flowers out of paper

If you're looking for a party decoration with maximum effect with minimal effort, check out this walkthrough, how to make big flowers out of paper poppies. Really making them is not at all difficult as soon as you understand how to make simple (for example, this giant poppy paper), you can experiment with a lot of layers and cut strips in the petals to make fluffy flowers.

You'll need:

• Two color paper. One color for the center and one for the petals. You need one whole leaf per petal and two whole leaves for the center.
• Corrugated paper for a contrasting inner lobe. To make a poppy, you need to choose a lighter color than the main petal.
• Chenille wire.
• Scissors.

To make a center: Take one whole sheet of paper and roll it into a ball. Then take another one and wrap the ball around. To make the petals: take one sheet of paper, fold in half and cut the upper left corner along a large curve. The result is a rectangular semicircle.

Unfold the corrugated paper and cut a piece to half height. (This will be less than half the height when the flower is picked.) Pull the top edge of the corrugated paper so that it straightened from above. Repeat until you get as many petals as you need.

Take one petal and wrap around the middle part. Hold the bunch with one hand and add the next petal so that it slightly overlapped the first, then add the following. Walk in a circle until you collect everything in one bunch.
Wrap the chenille wire around the bundle and twist tightly so that the paper has nowhere to move.
Bend the ends of the wire into a loop. You can use it to hang on the wall.

30 photos of giant flowers made of paper

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•