Hammock for a cat: do it yourself, photo, master classes

 

There is a possibility that your cat may ignore the hammock for a short while. If the kitten does not want to approach the hammock; try putting in it a toyor just sprinkle catnip; this should get his attention. Cats do not like to be in low places, so try installing a hammock in an elevated place. Your cat must feel completely safe with its surroundings in order to relax.

How to make a hammock for a cat

Every cat needs a cozy place to sleep. The hammock allows air to circulate from below, and the canopy provides a slight shade, well, and an attractive appearance.

This project does not require any metal fasteners, as well as a minimum of materials and tools. The total cost should be below $ 10. If you know how to cut and drill, then do this DIY hammock for a cat in a couple of hours. True, the author took a little more time, but the man was a pioneer, he went through trial and error. And you already have detailed step-by-step photos and no less detailed instructions on the author’s website, so you can learn from the mistakes of others. In addition, it is not at all necessary to make a hammock for a cat in the same order as the author, no one is a genius, most likely in the process you will have some ideas of your own.

Here are the materials that were used for this project.:

• 1x2 board 245 cm long
• 1x4 board 245 cm long
• 3/4 "sheet pile, 122 cm long
• 3/8 "sheet pile, 30 cm long 5 pcs.
• Yarn for a hammock (or 30 x 35 cm soft fabric)
• Light skin 25 x 60 cm (or heavy, opaque fabric)
• Leather lace (or string)

Necessary tools:

• miter saw (or any saw)
• jigsaw
• pencil
• ruler
• drill
• 3/4 "and 3/8" drill
• sandpaper
• knitting needles

Further step by step photos are at your disposal, a link to the instructions can be found under the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cat hammock on the window

Cats like to look out the window, they are so inquisitive by nature. See how easy it can be hammock for cat on the window do it yourself from PVC pipes. Cut four pieces of pipe and using fittings, assemble pipes into a rectangle with two U-shaped connectors on one side of the rectangle and two T-shaped connectors on the other side. Insert the suction cups into the open end of each T-fitting. Cut a piece of fabric to pull inside a rectangle with a flap extending from each edge and sew a flap around each pipe. Attach one end of the wire to the large suction cup and the other end to the open corner of the rectangle and repeat to make the second suction cup mount at the other open corner. Hang the cat hammock on a window or sliding glass door.

Here is another example how to make a hammock for a cat on a window with your own hands. This option is even simpler. The design is designed for a cat weighing up to 7 kg.

Materials:

• wooden tray
• rope,
• small pillow
• suction cup hooks
• one bighook for a loop.

Assembly instructions for step by step photos. If you liked this idea, below, under step-by-step photos there is a YouTube link, although you will not see much more there than on step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cat hammock on battery

Everyone loves hammocks. Especially cats. And they also like to settle in warm places, near a battery or stove. See how to do DIY hammock for a cat on a battery. Of course, you can not install it in this way, this is just an example.

If you do not live in the "Khrushchev" with standard heating batteries, then you can make a slightly different device, but more on that below.

An approximate list of materials (approximate, because the design depends on the size of the hammock for the cat that you want to make).

• 2 planks approximately 30 cm
• 2 planks approximately 35 cm
• 2 pieces about 50 cm
• 3 pieces about 45 cm
• assorted small pieces
• a piece of fabric of approximately 45 x 70 cm, preferably elastic

Manufacture

In fact, the exact dimensions do not matter. The diagonal part performs 2 functions:

1. to hold the structure together
2. to raise the hammock to the desired height from the battery.

If you install elsewhere, then this is not necessary. The main thing is to make sure that the corners of the square correspond.

• Cut a piece of fabric to fit the frame, plus “tabs” for the shaped belts.
• Make sure the tabs are long enough to wrap around horizontal frame elements, plus about 3 cm.
• If you have a sewing machine, you can sew on your pockets first, and then insert the trims.

In order not to explain for a long time, in step-by-step photos all this is shown in the diagrams, so it’s not difficult to figure it out.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

And here is an even simpler option. Such cat hanging bed can be done in a few minutes, you only need a suitable sized board and strong chains.

Just attach the chains to the board and somehow hang them from the battery.

For complete happiness, put a soft sheet and the hammock for the cat is ready.

Hammock for cat on a radiator

This is just an example. You can buy a hammock for a cat on a radiatorIt is not expensive, or do it yourself. In fact, it's just a frame made of thick wire or other material. Truth, quickly litter cover. This problem is easy to solve.

All you need is a blanket that you don't mind cutting and sewing supplies. The sewing machine does the job faster, but you yourself can sew, manually, with a needle and thread.

1. Remove the frame from the fabric cover and cut the blanket to the size of the old cover.
2. Sew the hem on the side and bottom to make a long bag shape.
3. Then you just turn inside out to hide the handles, and the cover can be mounted in a frame.

Done.

• 
• 
• 
• 
•  

Cage hammock

It’s good to have instructions on hand to make a hammock of any size - for a cat, kitten or ferret. This is a non-specific design because it is made from waste tissue. But on the other hand it’s convenient that you don’t have to look for anything for a long time, trimming fabrics and any relevant materials are always at hand. Although the design is not fundamentally different from the usual hammock for a cat.
Hammocks can be made with attached clips, or only tabs for detachable clips. Metal parts can chip enamel inside a washing machine or dryer, so parts that are easy to remove are needed.

Such materials were used for these projects.

• polyester fleece
• polypropylene webbing from the belt, the belt is cut into 4 parts
• 4 guide rollers from an old wallet
• cheap shower curtains
• hooks

at first make a patternthen stitching a hammock for the cage on it, you can make several pieces of it. The manufacturing process is very simple, you see it in step-by-step photos,if you are interested in some nuances, follow the link to the website of the author of this project.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Hammock for kittens

Here is such a simple hammock for kittens you can make any material from the material in any combination: an old blanket, an old sweater and plus an old dog leash. If there is a sewing machine, excellent, but you can do just a needle and thread. How to do this is very accessible shown in step-by-step photos, so it is quite possible to do without instructions.
Only please make sure you cut all excess thread and throw it away. Kittens find a thread and play with it. The problem is that they can eat them and this thin thread can break their intestinal tract.
Take a hammock and tie a 4-corner to the legs of the ironing board, table, chair, etc. And you're done!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cat house with hammock

If you start looking for cat hair on the table, your bed, or maybe you find your cat’s tracks in the strangest places; your cat may need a place to rest. In fact, if you want your cat to feel at home, she will probably need cat house with a hammock ... and cats love cozy little corners. If you want to make a comfortable shelter so that your kitten can call him your own, here is a quick way to make DIY hammock for a cat in a cozy house. If you liked the idea, then implementing it is very simple.

What you need:

• Cardboard box
• Fleece fabric - 1 meter or a little more if your drawer.
• Hot glue
• Utility knife
• Scissors

How to do it, it is shown in the pictures, if it is not clear, the instruction is on the site. Although what might be incomprehensible? Cut the box, make cuts, tie the fabric.

• 
• 
• 
• 
• 
• 
• 
•  

PVC hammock for cat

This project is quite simple to manufacture and does not require a large number of tools. There are several ways to make a cat-like hammock. The frame is made of PVC pipes, which you can find in stores. Himself easy to stitch hammock using a sewing machine. You can make any size that fits your cat.

Plastic tube frames are fairly easy to make. Cut 4 tubes of 30 cm, then another 2 of 25 cm and two of 30 cm. Sand the ends of the pipes, then simply place them in the connectors, forming a rectangle with four legs. It will look like a small table.

Making the hanging part of the hammock is also very easy if you have a sewing machine. The type of fabric is up to you, a fabric that stretches well is suitable for a cat. Basically, what you will sew is a square piece of fabric with sleeves on both sides into which the pipes are inserted. Just fold the fabric and sew. Do it at both ends. Then start from the other sides to make the sleeves. Sew so that the hammock sags a little.

Tools and Supplies

• PVC pipe approx. 3 m
• 4 corner elements - those that are located face down, and two - 90 degrees
• 4 end caps for the end of pvc legs
• the cloth
• a thread
• hacksaw
• roulette
• marker

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

And this is another similar project hammock for cat from plastic pipes. Dimensions: height 25 cm, width 27 cm, length 42 cm.
The construction of PVC pipes is very easy to assemble, they are not expensive, and you can use an old shirt or jeans as a fabric for a hammock.

Material List:

• One PVC pipe with a length of approximately 60 cm, the thickness does not matter much
• Four tees
• Non threaded caps

You will need cut pvc pipe in the following way:

• 2 long pieces of 35 cm 14 ”long
• 6 pieces 20 cm long 8 ”long

Then wash the pipes and fittings in hot soapy water, wipe dry. The manufacturing procedure is the same as described in the example above, so we will not repeat it. You can use PVC cement to glue the frame together, but this is not necessary.There are actually many options, so you can do it as conveniently.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Hammock with cat toys

All cats and kittens love to play, but you love your pets, create comfortable conditions for them. Hammock with cat toys amazingly simple to do. For example, the author used 1.5 cm PVC tubes, as you can see, it turned out a lot of fun.
The structure is simple, but there are several parts that need to be in the right position. Photos are just a couple of pieces, but you liked the idea, the author wrote a small instruction, the link below.

• 
• 
• 
• 
• 
•  

Round hammock for cat

See an example of an interesting solution. original hammock for cat.

Before you do anything, you must have a plan. The classic approach is paper and pen. The best way to make a plan is to use a 3D modeling program. If you do not know how, use the author’s plans.

Will need tools

• Pliers
• Stapler
• Hammer
• Ruler
• Scissors
• Sandpaper
• Wood glue
• Flaxseed oil for decoration
• Saw
• Jigsaw
• Cordless drill and drill

Materials:

• The fabric is better fluffy :)
• Veneer (thicker than 12 mm)
• Plain wood (in this case, 19 mm thick birch)
• Small chains (about 15 cm)
• Small nails and screws
• Ear plugs
• Protective glasses
• Respirator

Probably not everyone has similar tools, but you can replace them with something similar.

1. Using a compass, mark the circle and cut it out. Use a blade with small teeth, then there will be less grinding.
2. In order to attach the legs, use glue and screws. Be sure to pre-drill holes to avoid splitting the wood.
3. You need to prepare your nails so that they can be used to attach the chain. Make incisions using pliers to bend them into a U-shape.
4. If there is a wood burner, you can add a template to the rim. Sand the edges and treat with linseed oil.
5. the cloth
6. Cut a piece larger than a circle.
7. A stapler is a good tool to use for attaching fabric. Another way is to use double-sided Velcro. This will remove the fabric for washing.
8. Leave a hollow in the fabric in the middle, it will be more convenient for the cat to curl up. Hang the rim to the base using a chain. First connect all three chains to a circle. Then measure 1 cm from the top of the rack and attach the other end of the chain using the same U-shaped nails.

Congratulations, you did everything! You can compactly install anywhere.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Hammock for cats from hangers

Want to do simple hammock for your cat, here is a great project

Materials:

• 24x14 fabric (should be thin enough to fit the hanger).
• 2 hangers made of plastic.
• 1 shower curtain.

Tools:

• sewing machine.

Step 1: Assembly

1. Lay the fabric on the floor.
2. Lay the clothes hangers on both sides of the sheet so that they can stitch, leave about 10 cm of fabric on top of the hangers.

Step 2: Sewing

Sew the top that you moved to the bottom so that it looks like the photo. This is the base of the hammock.

Step 3: Find a place to hang a hammock for a cat

You can install the shower curtain rod between any two vertical surfaces and hang the clothes hangers on the shower rod. In principle, you can hang a cat hammock in a bunch of places. Under the bench, on the stairs, etc. Just make sure that the cat can easily get to the hammock. Be creative and have fun.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Interesting hammock for cats

Here is another very simple design and relatively easy to do.

It consists of a frame that is made of cedar and pillows. The base of the frame is two sections connected to each other, made using a miter saw, and fastened with glue. The unit is designed to have a removable machine wash pad.

The pillow is made of faux fur and has a lining so that it is not cold from the floor.

Try to do it, it’s not difficult, cats will like it.

• 
• 
• 
• 
• 
• 
•  

Hammock for pets

This is an instruction on how to make a comfortable place for your pet to sleep, relax and play. is he suitable for almost any domestic mammal, the only limitation is the size of your pet. In the author, for example, ferrets and a cat use hammocks. Anyway, its easy to make very cheap and efficient.
You will need an old T-shirt, sweatshirt, sheet or other scrap of material. Scissors, summer, thread with a needle. If you are using a T-shirt, cut off the sleeves, and then cut both sides. You should have a rectangle with a neck hole in the middle. If you use only a sheet or piece of material, just cut it into a rectangle, the proportions depending on the animal (twice as long and three times as much as the animal).
To set up a hammock, simply thread the rope through two rows of loops and fasten them in a place where your pet can easily reach. Another plus of such a hammock, when you need to wash it, just pull the ropes through the hinges and throw the hammock into the washing machine!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cat hammock 100 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY hammock for a dog

See how to make it convenient dog hammock from a piece of fabric and several PVC tubes. As they say, cheap and cheerful. You can put it on your balcony or porch and spend calm evenings with your four-legged friend.

A lot of materials will not be needed:

• 3 meters of PVC pipes
• 4 turn signals
• 4 T-fittings
• Caps

From tools:

• hacksaw
• scissors
• sewing machine
• measuring tape
• paper bag for template

How to make a hammock for a dog with your own hands You will understand the step by step photos. Dimensions can be set independently, depending on the size and weight of your pet. The dog in the photo weighs only 5 kg. In this case, the hammock frame is 56 x 35 cm. The order of this: cut the size of the PVC tube, make a template, with it it will be easier for you to assemble plastic tubes. Then do cutting and sewing. So that everything fits tight when you assemble the structure, you can use a little glue. If you are interested, detailed instructions are on the site.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Hammock dog bed

Instructions on how to do hammock dog bed ... By the way, such a thing can be bought in an online store, however, in the UK at a price of about $ 150. But why buy if you can do it !!!

For this you need:

• Boards (author used elm)
• Conventional tools; saw, drill, hammer, drill, etc.
• 4 bolts with hooks
• 4 dome nuts
• 4 carbines
• the screws

Step 1: Base creation

• First determine the size of the hammock for the dog.
• Then find the center of one piece and set the other part at a 60 ° angle, as shown in the photo.
• Glue, tighten and tighten the screws.

Step 2: Making a hammock

Specify the height at which the hammock should be. Install the two posts at an angle of 107 °.

Step 3: Mounting

When mounting, leave enough gap at the end so that the base can be cut by the same angle as the legs. Although not necessary, the structure will also hold at angles from 90 ° to 107 °

Step 4: Installing hook bolts

Mount the eyebolts at the top of the stand, providing a tension of 180 *

Step 5: Hammock fabric

Cut the fabric to the desired size, sew on the edges, add eyelets.

Step 6: Install a hammock

Mount the hammock and you're done!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here are some more examples of dog hammocks

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY hammock for a dog in a car

Example, how to make a hammock for a dog in a car do it yourself. Of course, it’s better to buy such a device, the store has a very large selection of car covers for dogs, but if you decide to save money, then this problem is completely solved. If you have a sewing machine, then in a couple of hours you will sew such a hammock.

You will need 3 meters of suitable fabric, old towels and 4 meters of webbing.

The main task, choose the right fabric for the hammock, which will mainly protect against moisture, well, plus wear-resistant, dirt-resistant, etc. In general, best suited good quality nylon or tarpaulin. You will use towels as an insert, take baths - a good option. Fold the towels in three layers and sheathe the fabric to create a soft pad.
The device is equipped with four adjustable attachment points using parachute buckles and a webbing. By attaching two pieces to each end, the padded piece will hook onto four car headrests, making this device safe, and the dogs will be comfortable.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

There are many options, such as

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•