Posted in The best homemade products from around the world

How to make a folding workbench: save space, work - remove

folding workbench

No workshop is complete without a workbench, but not every room has a place for a large, separate structure. This folding workbench provides a convenient place to work and folds easily when not in use to save space. Make do-it-yourself folding workbench it is possible at home and at no special cost. By the way, you can use the old door for the countertop, because a solid stove will cost a lot.

Necessary materials:

Long boards 96 "(244 cm):

3 pcs. 1x4
1 PC. 2x4
1 PC. 2x2

Sawing

Worktop 1 1/2 "x 24" x 80 "(4 x 61 x 203 cm)
Mounting Terminal, 1 1/2 "x 3 1/2" x 80 "(4 x 9 x 203 cm)
Shelf, 3/4 "x 3 1/2" x 80 "(2 x 9 x 203 cm)
Hinge plate 3/4 "x 3 1/2" x 80 "(2 x 9 x 203 cm)
Front Rail 3/4 "x 3 1/2" x 80 "(2 x 9 x 203 cm)
Leg, 1 1/2 "x 1 1/2" x 33 1/2 "(4 x 4 x 85 cm)
Foot block 3/4 "x 3 1/2" x 7 "(2 x 9 x 18 cm)

Instruction how to make a folding do-it-yourself workbench

First prepare the countertop. This is just a 80 cm solid core door. You can pick used door.
Do a shelf and mounting terminal. Saw off the shelf in length from the 1x4 board, as shown in the diagram.
Then cut mounting clamp from a 2x4 board. With the pocket hole clip in place, drill holes on the back of the mounting terminal, as shown in the diagram.
Attach the shelf to the mounting terminal using the 3 mm hole for the large-thread pocket.
Cut off hinge plate along the length of the board 1x4, as shown in the diagram. Then attach three loops to the plate.
Cut off front guide, as shown in the diagram. Then, with the clip in place, drill holes in the pocket on the back of the front rail, as shown in the diagram.
Install the front guide.
Do and set legs. Cut two legs from a 2x2 board, as shown in the diagram. Then cut two 1x4 foot blocks. Then install the foot blocks on the underside using four flat head screws in each block. Screw the legs to the brackets, and then install on the leg blocks.
Mounting. First determine the location. Measure the height of the leg and block from the floor and mark the level line on the wall.
Place the shelf on this line and secure with two screws. to each wall rack. Then screw the hinges to the rear edge of the workbench. Hold the assembly over the bar and screw the hinge plate onto the mounting plate.

Desktop workbench needed in every home, even if carpentry or locksmithing, this is not your hobby. If you want, if you don’t, periodically there is a need to repair or do something. The problem is often where to find a place. Therefore, portable or folding workbenches, this is the best solution in this situation. If this topic is close to you, be sure to read the large article “DIY folding workbench 500 photos, drawings, instructions» https://i.expert-h.com/en/verstak/verstak-skladnoj-svoimi-rukami-500-foto-chertezhi-instruktsii. Here are listed different options for different types of rooms, the advantages and disadvantages of folding structures and of course case studies with step-by-step instructions, how to make a folding do-it-yourself workbench.