Chic buffet with a sliding door in a farm style: diagrams, drawings, instructions

 

Source materials 8 foot (244 cm) boards and bars

• 2 pcs. 2x10
• 2 pcs. 1x8
• 2 pcs. 1x10
• 1 sheet of plywood or fiberboard with a thickness of 1/4 inch (0.64 cm)
• 3 bars 1x2
• 4 things. 1x4
• 6 pcs 2x3

Sawing parts

Framework

• 4 bars 2x3 84 "long (213 cm)
• 4 bars 2x3 17 "long (43 cm)
• 4 bars 2x3 14 "long (35.5 cm)

Parties

• 2 sheets of plywood 36 "x 17-1 / 4" (91.44 x 44 cm)

Front frame

• 5 1x4 boards 36 "long (91.44 cm)
• 8 boards 1x4 17-3 / 4 "long (45 cm)

Shelves

• 2 boards 1x8 87 "(221 cm) long
• 2 boards 1x10 long 87 "(221 cm)

Supports and shelves

• 5 1x2 bars 14 "(35.56 cm) long
• 5 1x2 bars 17 "(43 cm) long

Back wall

• 1/4 "(0.64 cm) plywood 36" (91.44 cm) long

Bottom trim

• 1 - 1x2 at 90 "(228.6 cm) - both ends are cut at an angle of 45 degrees, NOT parallel, measuring the longest point
• 2 - 1x2 at 18-3 / 4 "(47.62 cm) - one end of the cut at an angle of 45 degrees, the longest measuring point
  top
• 2 boards 2x10 91 "(231 cm) long
• Doors are trimmed altogether 20 "x 30" (50.8 x 76.2 cm)

How to make a buffet instruction - a short full description can be read on the site, a link under the diagrams and drawings.

1. Assemble two frames from bars 2x3. The framework should be twisted together, since this is the main support for the entire structure. Use long screws and pocket holes. Glue the joints.
2. Install side panels. You can use any material - plywood or recycled wood. Better screw them to the frames, but you can also use nails and glue, this is not essential.
3. Then collect front frame. Lay out all the boards, bait with nails, then fasten.
4. Lay boards bottom shelf to the lower frame. Apply glue and nail.
5. Between the boards there may be a gap, but the shelf should not extend beyond the back of the lower frame (side tabs should be 0.6 cm back).
6. Assemble the bottom shelfby attaching the boards to the spikes. Assume a gap in the middle.
7. Install the shelf inside the console and secure it from the outside.
8. Fasten the back wall. You can use a solid sheet of plywood or, as in this case, cut into strips.
9. Long wood screws attach the topso she was flush with the backand the side protrusions are even.
10. Doors are made of 1/2 "plywood (1.53 cm) with small strips nailed on top, but you can use various methods for making doors.

Of course, the theme of buffets is very extensive. There are many forms, styles and, most importantly, eras that you can choose for this type of furniture. If you have long dreamed of your own buffet, find out more in the article “Buffet do it yourself. Master classes + 700 photos» https://i.expert-h.com/en/shkaf/bufet-svoimi-rukamiwhere you will find 25 master classes with step-by-step photographs, drawings, diagrams and instructions.