How to make a fence from a welded mesh Gitter ^Favorite

welded wire fence

Each object needs its own type of fence. For example, to build a brick fence for a large area is unprofitable, and the wattle fence is somehow not solid. Therefore today is very popular Gitter Welded Mesh Fence. It is more reliable and easier to install than other mesh fences, as it is sold in ready-made sections.

Reliability of the design is ensured by anti-deformation ribs, these are special bulges that enhance rigidity. The Gitter mesh is made of galvanized wire by spot welding, so the mesh does not sag and the structure is solid. It is also resistant to atmospheric influences, mechanical damage and corrosion. Such a fence is designed for a minimum of twenty years of operation. And if the need arises, then the elements of the fence can easily be replaced.

Also in the plus you can bring its low cost and attractive appearance. Due to the unobtrusive form of construction, the fence is well suited for fencing sites, both in the city and in the countryside. Therefore, it is often used in the fencing of playgrounds, school yards and administrative buildings. It also fits perfectly into the landscape around the infield of a country house, and for gardens and front gardens, it fits perfectly, as it does not create a shadow.

The installation of the fence from the welded mesh Gitter can be done independently, because the installation does not require special tools or skills.
Marking is done with ordinary roulette, although it is better to use the construction level to install the pillars. Pits are dug up to a quarter of the height of the support. If in winter the soil deeply freezes, then it can be deeper.
Using the level, metal supports are installed strictly vertically, fixed with spacers and filled with mortar. Pay special attention to corner posts, and those on which the gate and gate will be installed.
After the solution has completely solidified, sections are attached using four U-shaped clamps.