How to make a reed fence

The main thing is that the material will cost free, and at the same time you can pretend that it is not about money, but you are simply a great original. Fence from reeds - it looks impressive, at least it looks better than wattle from branches. The reed stalks reach a height of more than two meters, so you can build a fence above human height.

The stems reach their maximum height in October, during this period and reeds need to be harvested. The simplest technology for making a fence, using a special workbench. In general, make a table about two meters long, then knit reeds, wire or rope, it doesn’t matter that the thickness of the mat is 20 - 25 centimeters and lay a flat load on top. The place where it will be knitted does not need to be pressed. You knit in increments of 15 centimeters (exactly how the broom is knitted). To prevent the mat from falling apart, there should be two or more firmware lines, usually done in 4-5 places. The ends of the wire or twine are carefully fixed at the edges. The width of the mat should be half as much as the height. When you fill your hand, you will rivet such mats in 10 minutes.

You can make it even simpler - tie the reeds into sheaves, halve and tie to other sheaves. Then simply attach to the frame of wood. It will turn out not so accurately, but reliably.

But the reed fence has a very significant drawback, it burns very well. The cause of the fire can be anything, even a badly extinguished cigarette. Therefore, you will need fire impregnation, of course, you will have to, it will be spent a little, and the environmental friendliness of the slag will suffer, but you yourself understand safety first of all.