How to make a cheap fence in the country

But how to make a beautiful and reliable fence and save money?
First you need to determine the size, because the cost of the fence will depend on this. In principle, everything is clear here, a transparent fence is cheaper than a solid one, and a high fence is more expensive than a low one.
Concreted or just dug up poles will cost less than the construction of a strip foundation.

Thus, having decided on the size, we begin to choose a material that meets our requirements.
For a cheap fence, a tree is a very good option. Wooden fencing can be both stylish and beautiful. If you save on the full program, then, of course, the picket is best. It can be made of any shape, choose the optimal distance between shtaketin, give the desired configuration.

The trellised fence will cost a little more, but if the slats are replaced by poles, then this is also an economical option. But the cheapest wooden fence is wattle. Of course, you will have to spend time on its manufacture, but practically you do not need to spend money, except for impregnation, if you do not want it to become unusable in a couple of months.

If the wooden fence does not fit, you can put a metal one. Here, too, there is the opportunity to choose economical options. For example, mesh netting. They come in different types - with a polymer coating, galvanized or the cheapest, made of ferrous metal. But for the latter option you will definitely have to buy paint, otherwise it will not be a saving, but an empty transfer of money. An unpainted metal mesh will rust very quickly and you will have to buy a new one.

Separate sections can be made out of the netting mesh, it is more beautiful and reliable, but this method is much more expensive than just a stretched mesh, since welding work and a lot of additional material are necessary.
Cheaper netting will cost a corrugated mesh, which is made from interwoven wire, since it will need half as many columns. For such a mesh, flights can be made up to five meters, while for a netting no more than three, as the mesh will sag.
They also use a welded mesh, it is much easier to operate, but of course it will cost more, but not as expensive as a capital fence.

You can make a cheap fence from corrugated board, but this is not advisable, because if you use inexpensive material (the thinnest profiled sheets, pipes with a small cross-section), this will affect the quality and as a result, instead of saving, you may be at a loss.

In general, if we conclude, then in terms of price and quality, the most economical ones are metal mesh fences. With proper maintenance, they can stand up to forty years. But due to the fact that they are transparent, this option is not suitable for everyone.
Then you can stay on a wooden fence. If they are properly processed and constantly monitored before installation, then a wooden fence will last for many years.