How to make a fence from slate

how to make a fence from slate

In rural areas and outside the city, the owners of the land always have a question with a fence, or rather with the cost of its construction. In search of economical options, people use various materials, such as slate. But how to make a fence from slate do it yourself?

There is nothing complicated about it, another question is where to put it. As you know, the purpose of the slate is completely different, for covering the roof, but since we are looking for an economical option, it is also perfect for a fence. It is clear that it can not be used on the front side of the site or along the road. Slate - the material is fragile, but it is suitable for fencing between plots or fencing of outbuildings inside the plot. Moreover, such a fence will not rot, will not rust and will not burn.

And another plus, it’s not necessary to buy new material for the fence, the old slate is no worse and if you don’t have one, you can buy it from the neighbors for cheap. By the way, if you unfreeze land with them, then the costs can be divided in half.

Now let's think about how to do it right. fence from slate, so that it stands longer and cheaper. In addition to slate, the rest of the materials will be needed as a normal fence. That is, steel pipes for mounting posts, corners and wooden beams. Next, the installation goes in the usual manner, do the marking, dig holes under the poles, just do not forget about corrosion, treat the bottom of the pipes with bitumen. Then install the pipes in the pits, fill with a solution and wait until it hardens.

For the next stage you need a drill and a grinder. First, prepare the poles, drill holes for fastening in them, then cut the corner and the beam in size, connect them, the corner under the beam, fasten with screws using pre-made holes. When the design is ready, fasten the slate. It also needs to be prepared in advance, cut off the edges with a grinder to make half-waves, then the joint will be more dense. The main thing is to mount the first sheet exactly, and then put the rest on it. Just do not rest the slate on the ground, leave space. If you wish, of course, you can cement the bottom, but it's like yours with finances. That's all there is to paint, and the fence “Long live the savings” is ready.