DIY kitchen table 300 photos, diagrams, instructions

 Stylish kitchen table

Simple and tasteful, this one stylish kitchen table it simply captivates with its simplicity, there is a rustic immediacy and forms of modern Art Nouveau.

By the way, this model is very popular, if you want the same in your kitchen, you can do it yourself, guided by the step-by-step pictures below.

• 
• 
• 
• 
• 
• 
• 
•  

 

DIY dining table made of wood

At first glance it might seem making a wooden dining table with your own hands is quite difficult, but what you see in the photo was not done by a professional at all, but what makes us worse? So worth a try. This is a very reliable design made of inexpensive wood and will last a very long time. It took the author ten days to make, and if you have experience, then you can probably do it faster.

The step-by-step instructions used a circular saw, not everyone has it, but if you prepare your materials, you can cut them in the workshop, it’s not so expensive. Still need a drill, chisel and ordinary carpentry tools. The photo has a freehand drawing, but the dimensions can be changed, depending on the size of the kitchen. Pay attention to the frame mount, there are different ways, this is perhaps the simplest, but requires accuracy in the calculations. Further on the photo, see the assembly steps.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

By the way, the design will be a little cumbersome, so final assembly is best done in the kitchen or in the place where you plan to install it.

 

DIY wooden table in the kitchen

This option is not the most difficult, but you are guaranteed to be able to do this work yourself, in just a weekend, if you use step-by-step photos. Also monitor the quality of the wood, then you will probably succeed nice wooden table in the kitchen with good appearance.
Make a list of all the materials needed for this project and select the best offer in the store in terms of price and quality. Make sure that the wooden beams are absolutely straight and do not have any visible defects. Use good glue and clamps to seal tightly around the outer edges of the components to get a good look.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Almost the same table, only the process is depicted in a more visual form. Even a beginner carpenter can make a kitchen table with his own hands.Although not only skill is important here, but the right choice of carpentry tools, this will make the job a lot easier. Here are shown step-by-step pictures in colors and colors on how to make a kitchen table (1.75 x 1.2 meters). Of course you can use this step-by-step instruction in pictures for a table of any size, since it mainly shows the procedure for the manufacture of such a design.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Do-it-yourself round kitchen table

Unfortunately, the layout of the kitchen does not always allow you to get a round table, from a practical point of view it is not very convenient. But it is cozy and creates a special family atmosphere. So if the size of the kitchen allows, making a round kitchen table is a great idea. The most interesting part is the legs or one leg, depending on how you like it. In this case, a simple design on four supports was used, but in a decorative form, so to speak. To make legs, start by creating a template. Of course, to get it beautiful, you’ll have to tinker with it, as you can see in the step-by-step photos, you will need glue, clamps and a good grinding machine.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Source woodgears.ca/table/round_dining.html

 

Round kitchen table on one leg

 

Which support to choose for a round table depends on the weight of the countertop and the aesthetic tastes of the master. A round kitchen table on one leg looks very elegant, in a modern kitchen such a designYou don’t see a ktsiyu often. You can do it yourself using step-by-step photos, though it is not so simple to make a table support, but if you have the necessary equipment, then why not try it.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Types of round kitchen tables 38 photos

For lovers of classic style and sophisticated furniture many types of round kitchen tables will do. It’s true that making them yourself is more difficult than a traditional rectangular or square table, but for the sake of style you can try. In this collection you can see what models are, the whole difference is usually in the legs, outwardly, of course. So you can choose the option, and how to do it, this is the second question.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

DIY folding table for a small kitchen

The original idea of ​​a folding table for a small kitchen, consisting of two separate halves. Agree, it’s very convenient, the husband went to have lunch or the child came from school, covered on one table, and on the second, do your chores. In the evening, when the whole family is assembled, you can move the halves for a joint dinner. The tables are connected by hinges, so that all manipulations are very simple.

 

 

 

 

 

The step-by-step photos show how to bring this idea to life. The tables are very simple, without any “bells and whistles”, according to the drawing below, anyone with minimal carpentry skills can assemble it.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Original folding table in the kitchen

A small space requires thinking outside the box. Here is an idea for you - original folding table in the kitchen, which certainly will not take up extra space, or rather, when assembled, it generally takes up no more space than a picture on the wall.

 

 

 

 

 

 

 

 

 

 

The design develops, a bracket is attached to the wall, the table is tilted up and fixed with a regular window shutter. The following is a diagram and how to make such a table with your own hands.

• 
• 
• 
• 
• 
• 
• 
•  

 

Small folding table for the kitchen

One more a good solution for a small kitchen, a table with a folding table topvery comfortable. The place is, like an ordinary small bedside table, easily turns into a dining table for two three people, and with its dimensions is very functional. The design is simple, so making it with your own hands will not be difficult.

 

Here is a diagram, as you can see, materials will also need a minimum.

The assembly order is shown below, the main parts are countertop, bedside table and drawer. Pay attention to the original solution of a double-sided bedside table.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY folding table

Economical, functional, stylish - all this can be said about this nice folding table. It can be installed in the kitchen or small living room, as you see, it does not occupy a place in the assembled state, it just folds out, looks very stylish, and most importantly, you can easily make it yourself. The main element of the table is the frameWhen the table is folded, it will decorate your wall. The design is based on special shelves, which by means of latches keep a table-top in vertical position.

 

 

For stability, you need to make a bedside table and a small table that you see against the wall same height. How to make a beautiful decor for a hinged frame, think for yourself, here is an option to install a frame for a picture in the middle, you can, for example, hang a poster or what is fashionable today, make a slate board.

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Compact dining table in the kitchen

 

When space is limited, we have to choose furniture that suits and not that we like. The solution to the problem is to do it yourself. This wall-mounted dining area not only takes up almost no space - You can also lift it when not in use. You can make it from a laminated board or plywood.

 

This reclining table can be used in the kitchen or dining room, or even as a desk. It is important to secure the lower support well.to fix the countertop, excluding the possibility of its fall, especially if there are small children in the house.

• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY kitchen table

 

Everyone wants the kitchen to look stylish and beautiful, but often it is necessary to solve more pragmatic issues: how to place all the necessary furniture in a small space. Unfortunately, most domestic apartments are not as large as we would like, therefore do-it-yourself kitchen sliding table is a good way out the situation. It allows you to significantly save space and maximally compactly place the rest of the furniture. The folding table option presented in this article has a stable and durable design, forResidually simple to manufacture and does not require expensive materials. Countertop size when the table is folded 1200×700if you push it apart, the area increases to 1670 mm, and this is at least plus two people fit at the table.
To increase the area of ​​the countertop, a special insert is used, its dimensions and the dimensions of the entire table can be seen on this diagram.

If you are completely making a table from scratch from your materials, you will need a circular saw, jigsaw, drill and screwdriver. The assembly order is basically the same as a regular table, only additionally manufactured sliding insert design from aluminum corners, as well as on the middle of the countertop, additional hinges and latches.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Extensible kitchen tables

as well as folding, retractable and folding

It is the optimization of the usable space in our homes that drives the search for creative solutions, such as folding tables, multi-level sinks, roof rails and bar counters on window sills. Kitchen sliding tables are mainly created for the same purpose.. There are different designs, sometimes very interesting, you yourself can appreciate in this collection.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Tiled kitchen table

You didn’t get an idea make a countertop from a tile? Try, in my opinion, quite original. No special instructions are needed if you can lay tiles, of course. The whole problem, not only to prepare the countertop, but also to choose the right tile, the wall in this case disappears, because thickness should be at least 5 mm, and better thicker. In addition, you need to think about coverage, choose better matte, because the table will be used constantly, and for glossy tiles you need careful care. The photos below show an example of how the author did it.

• 
• 
• 
• 
• 
• 
•  

DIY large dining table

Each family has its own rules, you can eat at the coffee table, but of course it is better when the whole family gets together to have lunch or dinner more often. AND great when the house has a large dining table, and if it is made with your own hands, then it is also the pride of the owner of the house and the whole family. These step-by-step photos show how to assemble a regular dining table with your own hands from finished parts, this is if you do not have special equipment. Anyway, ordering legs and countertops is much cheaper than buying a finished product.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Single leg square kitchen table

 

The classic version of the kitchen table is rectangular, but if you live together, you can make a square kitchen table, the severity of the square is practical and functional, and if you fix the countertop on one leg, then your kitchen will also look stylish.

 

The support should be primarily reliable, step-by-step photos show the assembly order, all parts are glued and screwed together. To prevent the table from swinging on an uneven floor, you can Additionally add cork pads.

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a standard kitchen table with your own hands

Even a beginner carpenter can make a kitchen table with your own handsand choosing the right tools will make the job a lot easier. This step-by-step guide describes how to build a table with surface dimensions (1.75 x 1.2 meters). You can apply the same plan to products of different sizes by cutting boards of different lengths, or using fewer parts, changing the shape of the legs or crossbars. The picture on the left is just an example, the step by step photos show the process of assembling a standard table with a tabletop from boards. The pictures show the order of joining the countertop boards, assembling the base frame and grinding. Pay attention to the fastening of the diagonal struts.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY kitchen table with drawer

You can make this option yourself, a kitchen table with a drawer. Today, many people prefer to make tables using corner ties, it’s easier, of course. And here is a classic version - on spikes, although with this option a little more work, but it is easier to repair. A drawer is made with a plywood bottom in the form of a box, plus it will be necessary to buy roller guides. There are two more types - with a finishing mechanism and telescopic, the latter are more perfect, but better suited for a chest of drawers or a desk, where there are many drawers. The assembly procedure of the table is shown in step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kitchen table drawer

Here is an example how to make a drawer for a kitchen table from a laminated chipboard. In this case, used roller guides, although you can use ball, expensive metaboxes or simple wooden planks on which the box slides, this is not important. Almost any system is suitable for a conventional kitchen table.

 

In this example, step-by-step photographs show how todraw the box itself. In general, nothing complicated, the main thing is to make sure that all the angles are right, that is, 90 °, and accordingly, so that there were no distortions. Also note that in mating runners the rollers were directed in one direction.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

One more example, how to make a box for a tablein a more visual embodiment, all the construction details and even the sizes of nails and screws are signed on the pictures, I think it will come in handy for a novice master.

• 
• 
• 
• 
• 
• 
• 
•  

Types of Drawers

A drawer for the kitchen table is a very useful thing, especially for a small kitchen. It is very convenient when everything is at hand, and the drawer of the table is just “at hand”. Structurally, they are not particularly different, so you can do it yourself, this is no more difficult than to put together a simple shelf.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Drawer diagrams and drawings

In this selection of diagrams and drawings, which will help you to make a drawer yourself, anyway, if you make a table with your own hands, then the rest of the details, including boxes, will need to be done independently. The larger the structure, the stronger the material should be. Usually, boards from 17 mm or thick plywood from 10 to 20 mm thick are selected for end panels and sidewalls. The bottom can be made of fiberboard or plywood, it depends on what you will be holding there, although you don’t put anything that heavy on the kitchen table, so they usually use medium-thickness plywood.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Types of table legs, mounting methods

If with tabletops everything is more or less clear, then table legs and methods of fastening them the most diverse. You can write a lot of interesting things on this subject, but for now just look at the photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Industrial design kitchen table

So, what was the idea of ​​the author. He wanted a pub-like table about 104 cm high. The width should be 122x213 cm so you can play board games. At first, a steampunk-style design was conceived, but the author wanted something simple with clean lines and a metallic appearance. Also, the table must be mobile so that it can be moved from the kitchen to the living room. If you like the idea, step by step photos are at your disposal. Of course, this is not the easiest

manual, and if you need more detailed information, on the website the stages are described in great detail. If you do not have access to the welder, you can make a wooden support frame for the table, and then add iron pipes made with piping, which are very common. It will also give you a great industrial look and will not require assembly tools.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Steel I-beam kitchen table

Steel I-beam for the kitchen table legs? Why not. Shelves are made of water pipes, so why a table cannot have legs from a steel beam, for lovers of industrial style this is the very thing. I even found step-by-step photos on the Internet how to make such a table - a specific piece, in assembly it weighs somewhere around 250 kilograms.

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cardboard kitchen table

Cases are different, they just moved, they don’t want to buy a cheap table, and they haven’t collected enough money for the expensive one. The author of this unusual project found himself in such a situation, which inspired him to idea to make a cardboard kitchen table. What is needed for that? Firstly, a lot of thick cardboard, the thicker the better.

Universal glue, you need a kilogram, no less. Meter wooden slats for the edge. Clamp or weight to hold glued parts together. Countertop made ​​5 layers of cardboard with cross corrugation. Brackets made of 4 layers are attached to the underside, with the outer layers being wider, folded and glued to the countertop. Legs are triangular rolls of carhon with vertical corrugation. To make strong legs, make rosettes of triangular layers.

 

 

 

 

 

 

 

The table top is very durable, the legs are relatively stable. You can add cross brackets to the legsto minimize wiggle. In the photo there is a table with a length of 170 cm, width 90 and height 86. Probably a little high, but the legs can be cut, not a problem. For the surface, as a short-term solution, you can buy a waterproof tablecloth to protect the cardboard, or cover the surface with a sheet of waterproof material such as a melamine board.

Original kitchen tables

Yes table in the kitchen It should be economical, roomy and comfortable, but what prevents it from being originalm? Here are a few ideas, of course, most of them are not made by hand, but if you have the skills to work with the tool, then why not try

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

 

Do-it-yourself simple kitchen table

 

Indeed, nowhere is easier. Of course, lunch at such a table is not very convenient, but you can have a snack while standing. After all, the working surface is used not only for eating, if the size of the kitchen allows, they put two tables, a dining room and a worker.

 

 

 

 

 

Generally such a table is called an island, they are used mainly for large rooms to increase the working volume of the kitchen, and for a small one such compact variant is suitablent with two drawers and a lower shelf.

 

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

This kitchen table is a good project for those who do not have real power tools and a complete set of hand tools. The only thing you need is a cheap cordless drill, screwdriver, tape measure and some sandpaper. The presented diagrams are rather a general guide, the modifications are very simple and any size can be changed with the same drawings. The presented table is 175 cm long and 85 cm wide and approximately 110 cm high. The top in this example is made of 1x4 white pine, you can use 2x4 or 1x4, etc. This table is built in the form of pieces that facilitate movement and assembly. The first step is to assemble the leg assembly. Then assemble the frame. When the lower part is assembled, install the countertop, try to fit the boards as tight as possible. That's all, it remains to grind and paint.

• 
• 
• 
• 
• 
• 
• 
•  

Cheap do-it-yourself kitchen table

if you need a simple table in the kitchen and look for inexpensive ways to make it, then this option will certainly interest you. The author used 2 pine boards 2.5 cm thick for the countertops, they are the cheapest, even if ordered in a carpentry workshop, four balusters from the railing were used for the legs, of course, you need to buy paint, sealants, glue for wood. Of the tools you will need a hand saw, drill, conductor for making holes at an angle or simply Kreg. The design is not tricky, so you can easily assemble it, guided by step-by-step photos, a more detailed description can be found on the site. The author liked his kitchen table so much that he decided to make the same in the living room as a TV stand; he is shown in the last photo in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kitchen table from the door and old boards

 

So, keep saving. If you have a narrow kitchen, such a table will come in handy. Find the old door and the floor is done. Perhaps, more time will be spent cleaning the door if it is already very oldOf course, if you have your own workshop, no problem, but if not, then you will have to tinker with sandpaper. There will be no problems with the frame and legs, only if you want something more sophisticated, and not what the author offers. The step-by-step photos show the assembly order and are even indicated in inches (1 inch - 2.54 cm), so if you do not want to fantasize, just follow the instructions. Of course, a table in a million does not look, but quite nice. Detailed details can be found on the site, the link is under the gallery.

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY kitchen corner

Basically this kitchenette not made from scratch, and redone from old furniture. If possible, you can try to do something like this. The process on step-by-step photos is not shown very well, but you can read the description on the site, the link under the gallery, there are very detailed comments of the author. Of course, the thing is not bad, the bench rises and contains additional storage space. The seatback is nice and strong, while at the same time corresponding to other panels. If you take it, then you will have a kitchen table, which is ideal for a small kitchen and maximizes space.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Table island for the kitchen

What is an island table? In fact, the table, which is installed in the center of the kitchen, although the "island" of course, sounds romantic. The islands, of course, are different, basically it is a multifunctional design, sometimes with a stove, sink, cabinets and shelves, and sometimes an ordinary dining table is called the island, as you like. The following are examples of some of these “islands”. If the size of the kitchen allows, and you can build something similar, in general, see the photo.

Do-it-yourself island to the kitchen

 

The project is designed for a large room, made this island into the kitchen with your own hands from a regular board based on two lockers. Very convenient in terms of size, the distance between the cabinets can be reduced or increased, especially without changing the entire structure, which only at first glance seems complicated. In fact, the assembly is not particularly difficult, except that in addition to skirting boards, there really have its own nuances.

 

It will be necessary to install the central and side walls in an upright position, or to install cabinets in place, and then arrange the walls around them. Or vice versa, keep the walls in place and slide the cabinets into the openings. When attaching the skirting boards, make sure that the side walls are at right angles to the central wall, and fit snugly against the cabinets. Using a level, make sure that the entire surface of the countertop is level and that there are no distortions. The manufacturing procedure in step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here on the diagrams are marked attachment points.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

In addition, after painting again check the side walls using a plumb lineso that they are at right angles to the rest of the parts. Use adjusting washersto make minor adjustments.

Island to the kitchen with metal worktop

Good option of the island to the kitchen with a stainless steel worktop. The design is relatively uncomplicated, but the island table is basically a small cabinet with a countertop, so unlike the usual table, more attention should be paid to the exact dimensions of the side walls.

Add bracketsto support the countertop of the island, two supports of two centimeters on each edge.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kitchen island from an old chest of drawers

If you have oldchest of drawers, such as the first photo in the gallery, or something like that, you can easily remake the island to the kitchen with your own hands. Although, it’s easy, strongly said, of course, you will have to work. The meaning of the idea is to make a new countertop of the size you need, and remodel the dresser into a floor cabinet.

How did this happen with the author of the Tasha project, see the step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself island to the kitchen

To undertake such a project, of course, some experience is needed. I probably would not have decided, I need a carpenter, a plumber, an electrician and a loader. But made this island into the kitchen with a do-it-yourself sink, according to the author, without involving service workers.

In principle, this is not a manufacture, but an assembly, because almost all parts are ordered or bought in a store. The costs, of course, are large, only to paint this colossus, how much money will be spent on paint. But still, significant savings. In general, if the hands are inserted at that end, then this can not be done.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

By the way, never rely on color samples; in real light on furniture, they always look different. If you need to paint a large surface, it is better to buy one small can, try, and then buy the rest. Perhaps you will lose some money, but it will do without moral damage, but this is so, by the way.


Kitchen table island

 

For a small room, such an island kitchen table is good, the perfect combination of functionality and rustic beauty. Of course, they make a real island when the kitchen area exceeds 20 square meters, or you have a studio apartment. The island allows you to chat while cookinginstead of standing with your back to others.

 

Generally, island, it is fashionable and functional, only for most of our standard kitchens, unfortunately, is not suitable. But the island can be attached such a small kitchen table even in a small room.

 

 

 

 

 

 

 

 

 

 

 

Assembly procedure on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Kitchen island with false ceiling

An interesting idea, if the size of the kitchen allows. What do you get? A large dining area for both eating and working in the kitchen will increase the area for storing kitchen utensils, well, and there will still be enough free space. The main thing is to think well where to place the table, then you will not move it, so make a plan. After we start with the manufacture of frames, upper and lower, which support a vertical pillar. It should be aligned both vertically and horizontally (x and y). See the second photo in the drawings. The remaining supports are installed after alignment as they fit. It is important that the column is straight! Next is the fixation of the upper part. See a photo with a metal top. They were used to transfer forces from a horizontal level (floating shelves) to a vertical pillar. We make the lower shelves and linings. To support the shelves use metal connectors. Wooden details from 18 mm fir (it is less prone to destruction than pine). For floating shelves, a 18 mm spruce and a 1.5 cm metal cable were used. To support the table, use metal connectors at the corners and edges. Detailed assembly plans are shown here..

• 
• 
• 
• 
• 
• 
• 
• 
•  

Detailed photo of the assembly of the kitchen island

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

What is an island table in the kitchen 70 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself table

To assemble a whole kitchen set is a complicated matter, but such a detail as do-it-yourself table with a do-it-yourself sink. I included these step-by-step photos in the article, because I myself came across this problem. Buying a kit with installation, an expensive thing, assembling it yourself is also not easy.

But following this step-by-step instruction in photography, you can understand the assembly logic, so it can come in handy. In any case, one cannot cope with such work, so it’s good if you invite a person with experience.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Source www.northstory.ca

Kitchen table with metal legs

Very simple design, only it will be necessary to buy metal legs. Determine the size and make a countertop. So that it does not bend, let the edges bars from the bottom sides and fix with screws.

 

Then we make holes with a jigsaw and fasten metal legs with screws. We clean the surface with a large emery cloth, then grind it with a fine one. We varnish and that's it, now you have a kitchen table.

• 
• 
• 
• 
• 
•  

Schemes and drawings of kitchen tables 42 photos

If you were inspired by the idea make a kitchen table with your own hands, then the collected diagrams and drawings will certainly help in this difficult, but pleasant business.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Types of kitchen tables 200 photos

Here you can see a selection of self-made kitchen tables made at a furniture factory, as well as island kitchen tables and other options that may interest you. Theoretically, any model can be made independently, because the main thing is the idea, and how to implement it, a technical question.

 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•