Do-it-yourself bed of pallets + 800 photos

 

The content of the article:

1. DIY pallets bed
2. Children's bed from pallets
3. Double bed of pallets
4. Backlit pallets bed
5. Bunk bed of pallets
6. Bed of pallets with storage drawers
7. Sofa bed of pallets
8. Pallets headboard

Bed podium made of pallets

As you already know, wooden pallets can be rethought in many interesting and creative ways. For example, an example is shown here, how to make a bed podium do it yourself. This design is actually not very difficult to assemble, but there are many variations of concepts that you must consider before starting your new project. For this bed you will need four pallets and several boards to align the outer perimeter and the central support. Not used in this project. no nails or screwsto assemble the structure. Detailed instructions can be read on the website, see below master class on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed of wooden pallets

There are many ways to reprofile wooden pallets, one of them is to make do-it-yourself pallet bed. If you like rustic furniture, this project is for you. Find 2 sets of pallets, this should not cause problems, you can buy them at any warehouse in the supermarket. Sand pallets, this will prevent splinters from entering. Apply a primer to the surface. Paint in any color you prefer. Put the two pallets together. You can cut a small board and nail it to the sides of the pallets. Add wheels to the corners. Put a mattress and sheets and enjoy a simple bed of pallets.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed of pallets diagram

Insofar as make a bed of pallets with your own hands - quite a laborious job, start with a good plan. First, measure your mattress. In this case, it is 2000 x 1400 mm, and the pallets found were 1200 x 1000 mm. Tip: cut the edges of the pallet, your fingers will be grateful to you! Almost always, when using used pallets, the wood is dirty, damaged by scratches or stains. Sanding the top layer will reveal the true beauty of the wood, and also prevent wood from getting into your mattress. Start with sanding paper from 36 to 100to remove all imperfections in the wood.

Sanding paper from 100 to 180 will remove any scratches. Tip: Finish with 180 to 500 sanding paper to remove any fiber irregularities for extra smoothness.
When sanding is complete, wipe the pallets with a damp towel or cloth to remove dust. Now about the assembly. Of the remaining parts, you will need 5 boards. Install them as shown in the photo. The idea is to attach the pallets to each other, so make sure you fasten all the pallets together. Tip: apply wood oil. Let it dry for at least 1 day.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed of pallets step by step

Today wooden pallets widely used for making inexpensive home furniture, including beds. Moreover, this process is not only inexpensive, but also simple enough even for people who have never been involved in carpentry. First of all, collect necessary materials and tools for work. You will need pallets of the same size with a width of approximately 10 - 12cm, glue, nails, screws and bolts, as well as a drill and a regular set of carpentry tools.

The instruction with a description of each assembly step can be read on the website, a link under the gallery.

• 
• 
• 
• 
• 
• 
•  

Simple bed of pallets

Here's how to make it elegant and simple. bed of standard pallets (120 cm x 80 cm) for a bed 160 cm x 200 cm. For work you will need 6 standard euro pallets (120 cm long, 80 cm wide) and a mattress 160 cm wide. First, cut 4 pallets from 120 to 80 cm long, the headboards will be only 80 cm high. Two pallets at the foot of the bed should be only 80 cmsince they will be combined with two full-sized 120 cm to get 200 cm of length for the mattress. The remaining pieces of 40 cm can be used to make shelves. Remove the lower rails and lock the spacers of the two pallets on the head, leaving only the upper surface. Screw them to the back of the head so that so that they close the gaps. You should have two separate headboards - one on the left and one on the right. Orient so that all pallets are at the top of the bed, and the pallets of the bed frame are 80 cm wide at the foot, and the “cropped” end is oriented towards the center of the bed. Then screw the headboard onto the bed frame from above. Before screwing in, make sure that the head of the bed stands directly on the frameUse gaskets if necessary.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY pallets bed

Urgently need a simple and cheap bed? Old, good pallets will always come to the rescue.

It's really very simple to do, just look at the step by step photos, how to make a bed of pallets. Want to know the details, a link to the author’s site under the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed frame made of pallets

This guide will show you how to make a simple and beautiful bed frame. platforms from pallets. Ideal for attic or for updating the palette of the bed. The main use of pallets in this project is mattress protection. Directly on the floor, the frame will collect dust and moisture and may become moldy. When choosing pallets, make sure they are safe to use.

Pallets can be treated with very harmful chemicals.

This is especially important to consider if you are using them for a bed project. Here are the sketches by which this was made bed of pallets. See below master class on step by step photos, the instruction is on the site, a link under the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Frame for platform bed

This is a multi-purpose bed, which you have probably seen many times on Pinterest, but it’s almost impossible to find instructions and step-by-step photos, so this information is presented here. In general, this is a time-consuming project, although many claim to have done do-it-yourself pallet bed in one day or even a couple of hours. They may have had good pallets, but in any case, sanding alone will take a lot of time. Exist different types of pallets; open, closed, with wings, 2 crossbars, etc. It’s also of different sizes, so if possible, choose the ones that are best for your project. In the article on the site you can read in detail how to make a regular bed frame made of pallets and some tips for those who are dealing with wooden pallets for the first time.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY bed made of pallets

Great budget option crib bed. The material that was used to complete this project includes: 17 Euro pallets, 3 mattresses, planks for shelves, many corners, screws, white paint and wood preservation oil. From tools you will need a grinding machine, drill, jigsaw, paint.

How to assemble a crib from pallets:

1. The pallets must be sanded to remove a rough surface.
2. Then paint all the pallets and let dry before assembling the frame, because it is easier to paint pallets separatelythan the whole bed.
3. After the paint has dried, you can grind it again so that the surface is smooth and beautiful.
4. Then transfer the pallets to the room where the family bed should be installed.
5. Set four white pallets along the wall as a headboard, then 4 pallets in front and 4 more on top. Two pallets should be located crosswise.
6. You can first sketch on paper and then place the pallets accordingly.
7. After installing the pallets, the side strips must be screwed on. This will ensure the stability of the bed. Then screw the woodenOh strips to the head.
8. Finally put mattresses and some colorful sheets.

• 
• 
• 
• 
• 
• 
•  

Children's bed from pallets

Children's bed from pallets - This is a unique and creative design, because you can do it yourself any bed design. Here is a simple example that you can try to make for a children's bedroom. In addition, it would be a great bed for guests, and also quite suitable for outdoor furniture, for example, a veranda.

How to make a baby bed with your own handscan be read on the website of the author of this project.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Children's beds from pallets 100 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Double bed of pallets

Repairing and decorating a budget room sometimes encourages us to be creative. This is an example of how to do do-it-yourself double bed of pallets - A bit rustic, but stylish, besides, you can save a lot. First you need to find some decent wooden pallets and adjust a bit to fit the size of the room. By cutting each pallet in half right next to the second bracket in the center, you can get ideal size for a double bedif put together. Saw the individual rails on one side, then flip and separate the lower rails so that just over half of the pallet remains. Do the same with the other pallet. Finally, connect the pallets in the central brackets with screws so that they do not move and the bed is ready.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself double bed of pallets

Here's how to make beautiful double bed of pallets. Although you can replace pallets with shutters, cabinets or wooden boards. The author did not provide detailed instructions and detailed step-by-step photos, because there are many tutorials, so there is no special need for this. Although in the gallery you can see some photos that display the general outline of the steps to give you an idea of ​​how this was made bed of pallets.

Bed sizes: headboard height 142 cm; footboard height 52 cm; width of head and footboard 212 cm

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Backlit pallets bed

If you need a cheap bed, easy to assemble, but at the same time stylish and with a modern design - make a bed out of backlit pallets.

This project started with 3D-Models Rhinoceros . After several experiments, this layout was chosen because it provides the ideal size that matches the size of a standard EU family bed: 160x200 cm.

Make a bed out of pallets planned with just a few tools - easy and simple so that any student or amateur can do this do it yourself in one day. Grinding is the biggest task when working with pallets, so get ready for a whole day of grinding. In addition, if you want to achieve good results, it is important to choose pallets that have really good wood.

• 
• 
• 
• 
• 
• 
•  

Double bed of illuminated pallets

Here is an example how to do do-it-yourself double bed of pallets with backlight and high headboard. Start with the legs of the timber. In order not to scratch the floor and facilitate the movement of the bed, add felt pads. For the head you will need one whole pallet and half. Sand, varnish and when dry, fasten in place. Attached a garland to the head of the head and pull the rest under the bed. Connect extension cord with switchto use as a switch for lighting. Part of the pallet is enough for the footboard, but add trimmed boards to completely fill the space. Sand and varnish as described above and allow to dry. Then attach a garland to this part and connect it to the part under the bed. In short, that's all master class see below on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here is another example how to make a simple bed platform do-it-yourself pallets platform.

All you need is white paint, wooden pallets, construction adhesive cloth and a brush. Instructions on how to make a bedcan be read on the site.

• 
• 
• 
• 
• 
• 
•  

All lovers of homemade crafts know that pallets are an ideal material for furniture. With minimal financial investments from wooden pallets, you can make decorative and useful furniture - sofas, tables, shelves, and you can’t even list them all. Here are some examples. beds made of pallets with LED or neon lights.

The magic of creating home furniture - ethen a whole world of possibilities. One such project is this bed of pallets with magnificent illumination which allows you to reveal your creative potential in interior design design.

The bed is built in a two-level format with space between pallets, with backlight bulbs, which make the entire structure unusually beautiful.

Bed of pallets with photo backlight

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bed of pallets with drawers

Make a bed out of pallets not difficult. This is a bed design project with 8 storage drawers. If possible, find 4 pallets of the same size. Cut the top boards from the two pallets and the bottom from the other two. In practice, it is necessary disassemble palletsbut it’s not easy. Then you need to add the base of the box. The pallets themselves are poorly adapted to move drawers. But the base will be useful to allow the drawers to slide and it will easier to do than add slides. Cut 4 panels 122 x 46 cm from the fiberboard sheet, glue to the lower pallets and fastened with paper clips. Sand and apply a couple of layers of white gloss paint. Then assemble the bed, securing metal plates and screwsas shown in step by step photos. How to make storage boxes is not shown here, but it is not difficult, you can use ordinary baskets or boxes.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Box of pallets for storing toys under the crib

This wooden toy box of pallets goes well with the feeling that it is part of the bed. To make such a design is very simple. Measure the bed to determine the size of the drawer. Two boards from the pallet, stacked on top of each other, will give enough space. Use others pallet partscropped to fit large parts together as shown in the photo. The manufacturing procedure is well described in the instructions of the author of the project on the site, a link under the gallery. See the master class below for step-by-step photos..

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

TOPallets with drawers 50 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

The following are some examples of how to make the head of the bed out of pallets with your own hands.

Pallets headboard

The design of this headboard is quite simple. Wide boards that work like beams on a pallet will be used both for the main frame and as an external decorative frame. The frame for this bed is 122 cm high and 137 cm wide. Again, this is for a full-size mattress, but you can easily fix sizes for any mattress. The project was developed using SketchUp programs. The joinery used here was a simple butt joint and fastened with pocket screws using a fixture Kregs K5 Pocket Hole Jig.

When the headboard is assembled, these pocket openings will not be visible. Drill two pocket holes at both ends of the three horizontal guides. Then just connect the parts of the frame together and attach each connection.

Read the full instructions on how to make a headboard on the site. Images from SketchUp and see the step-by-step photo of the assembly in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Illuminated pallets headboard

To make pallets headboard, a lot of materials are not needed. You just need to find a few boards from the disassembled pallets, buy polyurethane and lamps, this is if you want to do beautiful backlit headboardas in the photo.

Start by measuring the bed frame to which you will mount the headboard. Then measure the desired height. In this case, it is 200 x 210 cm with a box of approximately 70 x 60 cm. These drawers can be adjustedto get the size you want according to the width of your bed. How to make a shield, shown below step by step photos. You can drill holes for the wires of the fixtures in the back of the frame, like wiring in a house, or do it in another way. Then attach the bed frame to the headboard. This headboard was a little heavy due to the use of 2x4 bars for the frame. You can take lumber for a smaller frame.

• 
• 
• 
• 
• 
• 
•  

Want to make for your bed head of pallets? This is nothing complicated! Here are some tips and tricks to help you with this! Working with pallets is more an art, but the author wants to share some tips and tricks, surely they will help you when you discover your own methods of creating something beautiful from used pallets. Detailed instructions on how to make a headboard, as well as recommendations on how to choose the right pallets for such a project, read on the author’s website, link under the gallery. See the master class below for step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Here is another example how to make the head of the pallet.

This one is really easy.

Screw the plywood to the two 2x4 bars vertically. Then paint the plywood black to hide spaces. Align the first row of boards along the bottom of the plywood and screw them on the bottom. Continue to lay the boards up. Try to have boards of the same size in each row, this minimizationbreaks gaps. You may need to trim some parts to align the edges. For durability screw 3 L-shaped brackets to each of the two legs and attached them directly to the wall with the help of screws and drywall anchors.

Read more about the assembly procedure on the site. Below are step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

If you are looking for a budget option, bed with headboard will be the coolest option. Pallets are available, they are easy to clean, and can be taken apart fairly quickly. It took the author about 3.5 hours to break up five pallets, including sawing, nail removal, styling and cleaning. By the way good way to make out pallets - This is a circular saw to walk along their edges, just to free the pallet from the central nails. There are always lots of nails in these things! The headboard is assembled using Kreg 5 Pocket Hole Jig. For those who do not know what a pocket hole is. This is a hole that cuts into a tree at an angle of 15 °, which allows you to drill at an angle to attach a board or timber. The length of the screw depends on the thickness of the material. Despite this, they are very durable and can be hidden to make the connection look clean. The instructions and the list of materials can be read on the website, see below master class on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Headboard from the pallet 50 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself sofa bed of pallets

Such sofa bed of pallets A good option for a guest space if you live in a small house or apartment. That is, it’s like an ordinary sofa, but from below pull out bed. Thus, when you are not using the second bed, simply lower it back under the first. Of course, if you use this design for permanent recreation is not very convenient. Although, if your back can stand it, try it. The main thing is that making such a sofa bed from pallets is very simple and almost without cost.

The main component is one double pallet (240x80cm) or a combination of two standard (120x80cm) pallets.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bunk bed of pallets

Here is an example how to make a bunk bed of pallets with your own hands.

It used Kreg Jig for pocket holes in the back of the panels to screw them into a 4 x 4 rack as planned. Sand and paint each part before assembly. Detailed instructions can be read on the site, the link can be found under the gallery. Below, see a few step-by-step photos, how was the bed made of pallets.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Do-it-yourself pallet beds 200 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•