Bird feeder from boxes of juice: (schemes + 100 photos)

 

Juice box made of simple slots

This is a very simple and quick way to make bird feeders. INdesign options may be the most originalbut the principle of operation is that you just need to make a few cuts!

 

It does not make sense to describe in more detail, just look at the photo, everything is clear and understandable.

 

Such a feeder has the advantage of protecting the food from moisture.

 

There are two options that are not very different from each other feeders, but the second is a bit simpler: just cut out the holes, fill it with food and that's it!

Act and take care of bird food!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Feeder with a tray for food from a box of juice

In fact, as a material not only a box of juice can be used, but also of milk, cocoa, yogurt, that is, any, of a suitable format.

 

The size of the box used may be different, take what is. The main principle of action!

 

And the actions are completely simple and understandable from the presented photos: the box is cut, and the cut part is folded back and fixed with glue or adhesive tape. Thus, such a tray is obtained for feeding the birds.

It remains only to arrange to your taste!

• 
• 
• 
• 
•  

Juice dispenser feeder out of the box

Simple to manufacture and very practical bird feeder from a juice box.

The feeder is made with a feed dispenser, which is very convenient and allows you to fill the feed once a day or less, the feed does not spill out of the feeder.

For its manufacture, we need the following materials:

• box of juice for 2 liters;
• a piece of plastic, or thick cardboard;
• stick, you can use twigs or skewers;
• wire; scissors, clerical knife, wire cutters, pliers (if necessary).

1. Cut off the top of the box;

2. We make windows with visors so that less moisture falls on the feed. At least 2 cm should be retreated from the bottom of the box .;

3. Now you need to make a partition, as shown in the photo. If you are going to make it out of cardboard, then it is better to glue it with adhesive tape then, so as not to get wet, it should be enough for the season, but it is better to use waterproof and not too bending material;

4. At the top of the box we attach sticks or twigs, with the help of which the feeder can be fixed on the balcony, fence, or other place. You can come up with another, convenient for you, mount the feeder;

5. To the bottom of the feeder we also attach sticks, which birds can sit to bite the feed. Fasten them so that the sticks protrude no more than 3-4 cm, otherwise pigeons will often land on them.

Photos of the manufacturing process are attached!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Beautiful feeding box out of the juice box

A simple feeder from the juice box can be very attractive and original, if you put a little effort and a lot of twine !!!

 

Making such a feeder is simple: you need to cut out the windows, insert the sticks, as shown in the photo, and then arrange the feeder!

 

In the design, only your imagination can help you make a masterpiece !!!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Two Juice Boxes Bird Feeder

Variant of bird feeders FROM TWO BOXES FROM JUICE made pretty easy and fast. The work consists of several stages:

 

1. You need to make a hole on the wide side of the box, this will be the feeder itself, where the feed is poured. On the opposite side, you can make several small holes so that the moisture that gets into the feed drains.

2. The roof of the feeder is made of a second box of juice. We cut the box along the narrow side, we do not cut only the bottom.

3. Secure the roof to the feeder with a stapler or wire. The feeder is ready.

• 
• 
•  

Large juice box feeder

Another bird feeder made using just two boxes of juice or milk.

 

Plus such feeders in their cheapness and size. From two boxes you can make a fairly large bird feeder.

 

The photo shows that it is not difficult to make such a feeder out of boxes of juice, and explanations are not particularly required. Just pick up a pair of scissors or a stationery knife and look at the picture, and then act!

Creative feeders out of the box from juice

Making bird feeders from boxes of juice or milk is just a great activity for children. It’s easy to make such a feeder, adults will help to make a “window”, and design can be trusted with children!

 

Here is an idea for decorating a bird feeder we offer today - penguin feeder!

 

You can also come up with another design, for example "owl feeder"!

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bird feeder from a box of juice, children make out

The previous feeding trough is only one of many options for designing a feeding trough for children.

 

If the baby is still smallTo draw or gently color the drawing yourself, you can offer him to arrange a feeder like this, as shown in the photo.

 

Believe me, for a child this is just a fascinating activity, draw what I want!

 

You can also colorize the twig!

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Bird feeder from a box of juice, schemes

Very clear and simple schemes for creating feeders out of the box from juice or milk.

The diagrams show some possible manufacturing options, and the design you can choose the most different, here just a field for creativity, a boundless field ...

• 
• 
• 
• 
• 
• 
•  

Photo-gallery of feeders from a box of juice (47 photos)

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•