How to make an Abyssinian well ^Favorite

do-it-yourself abyssinian well

In some places where it is impossible to use an ordinary well, use time-tested abyssinian well. They gained their popularity because of the relatively easy installation and at the same time not requiring large expenses.

What are the advantages of the Abyssinian well.

Firstly, this is the simplicity of the design, which you can do with your own hands in just one day. Secondly, relatively little cost. Then, the Abyssinian well has high productivity, up to 40 liters per minute, and it can also be placed in any convenient place, even in the middle of the room. In addition, the water is usually of very good quality, with a balanced composition of salts and minerals.

For the construction of the well, three meter galvanized pipes will be needed, for their connection silicone couplings and rubber seals.

A filter is made in front of the tip at the bottom of the pipe. For this, holes are stitched in a checkerboard pattern and a stainless steel mesh is fixed on top with screws (or soldered). You will also need a pump, electric or manual and steel tip.

Work begins with the drilling of a narrow well of 7 - 8 centimeters in diameter. If you redo the handle, you can use a fishing drill. Having reached the quicksand, the drill is removed, and a tip is installed in its place, onto which a sleeve with a connecting pipe is screwed. So that the well does not silt, in the middle you can pour gravel, which will act as an additional filter.

Then, a pipe is driven into the ground or screwed into. In the process of deepening the tip, we increase the pipe. To check whether or not the tip has reached the aquifer, pour water into the pipe. As soon as she begins to leave, the goal is achieved.
It is necessary to drive the pipe as long as possible until the water fills the filter and rises a meter above the tip level. After this, it is necessary to pressurize water into the pipe to clear the filter from clay.
After flushing, it is necessary to fix the pump and pump out all the muddy water. When clean water goes, you can connect the pipe to the water supply system of the house.

To prevent external water from seeping into the well, it is necessary to equip a cement area around it. Also, in order to maintain sanitary safety, it is impossible to equip a well in the vicinity of the sewer or waste accumulation sites.

Garden bench with flower box

Application in the country of an old bucket

Garden bench made of branches

How to dig a well with your own hands

Rate the material

(1 Vote)

Other materials in this category: "How to make a filter for a well with your own hands How to drill a well for irrigation "

Hello, I am the author of this article, so I look forward to asking questions for this article in the comments below, I will answer all !!!

If you have questions on another topic, ask them on our forum, we will answer you