Vertical landscaping for wall decoration 93 photos ^Favorite

 

Wall trellises look very elegant and at the same time have a very simple design. They are ideal for blank walls of the house. It is beautiful and you can have a few pieces to cover the entire wall. However, this light and not complicated design will be a wonderful decoration not only at home, it can be installed on a site in a recreation area, in a garden, made part of the design of a veranda or terrace.

Here are some photos of how a vertical trellis is going.

 

 

 

 

 

 

 

 

 

 

 

It is advisable to have a special tool.

 

 

 

 

 

 

 

 

 

 

 

And fasten to the wall.

As you can see, nothing complicated.

Wooden trellis

 

You can also make a wooden trellis for vertical gardening. This, in principle, is the same trellis, only consisting of several sections fastened together. Trellis trellises are best suited for climbing plants. They consist of supports and horizontal struts.

The photo shows a diagram of how it looks.

Here are the necessary details and sizes.

First, the frame of the central section is assembled. Horizontal slats are superimposed on vertical supports and fastened in a convenient way, it is better, of course, with self-tapping screws, but you can also put it on glue.

 

 

 

 

 

 

 

 

 

• Then the lattice in the form of a rhombus gathers.
• Reiki are mounted in parallel.
• Planks must be sawed at an angle of 45 degrees.
• Fastening is done cross-cutting with screws.
• Diagonal slats must be mounted on the front side.
• All intersections are secured with self-tapping screws.
• The contours of the paper template are transferred onto the board and cut to size to make five segments.
• The outer radius of the arched arc should be 470 mm.
• The ends of the arch are connected to the central trellis.
• An external arc with a radius of 100 mm and an internal radius of 60 mm is cut.
• The arc is mounted in the center, on the outside of the grill.
• Arched rays are attached from the wrong side.
• Then rectangular frames are assembled, onto which a lattice of racks is stuffed - these will be lateral trellises.
• Using metal corners, install supports to which the trellises are attached.
• To strengthen the trellis is attached to the wall with four spacers.

 

 

 

 

 

 

 

 

As you can see, there are several methods for vertical gardening and trellis; this is a good option.

 

Wall trellis

 

Another trellis option, which is not mounted as the previous one, but directly to the wall. Several tiers are formed from the rails, as we see in the picture, eight vertical and six horizontal, the size of the structure can be made any way, even in the entire wall.

On the one hand, it is easier to make such a trellis than a trellis; the main thing is to firmly fix the frame on which the whole structure will be held. It will be necessary to make holes for the wall plugs in the wall, as shown in this diagram.

 

Grape Trellis

 

Decorating a wall of a house with a trellis, especially if it is not in the best condition, is convenient and profitable. But with the help of this simple construction, you can successfully hide other "problem" places on your site. For example, in these photographs you see how the owners of a small shed beautifully decorate it with vertical trellises.

 

 

 

 

 

 

 

 

 

 

If your site also has a garage or a shed for all sorts of things necessary in a summer house, you can follow the example of the owners of this shed. Wooden trellis is not difficult to make. Of course, if you still make the arch, it will take some time, and the trellis itself is an ordinary frame with a packed lattice. If you need to protect a sufficiently large space, several sections are used. This photo shows how to make one section, and then you can connect them as you wish.

 

       Operating procedure

 

1. In the corners, fasten the joints of the bars with screws;
2. on the reverse side, screw the diagonal bars;
3. remove the protruding parts of the strips;
4. turn the structure over and fasten it at the intersection of the plank on the other side, so that they are inside the frame;
5. treat the design with an antiseptic;
6. fasten the trellis to steel corners that can be cemented, if it is a stationary fence, or simply driven into the ground, then the structure can be moved if necessary.

 

 

 

 

 

 

 

As you can see, trellis can perform not only decorative functions and there are a lot of options for their use. See in this collection how you can still use them.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Trellises made of metal also look very beautiful. Usually these are forged designs.

But you can also use thick metal wire, fittings, corners and other details. Of course, the art of forging looks very elegant - durable, but exquisite forms give the visual ease of construction. And forged trellis twined, for example, with roses, is a real admiration. A very interesting solution to combined trellis, when in a wooden fence there are art forging inserts. Check out a few examples of using metal trellis.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

handsomely