Carnation flower made of paper. Do it yourself, step by step instructions + 300 photos

 

Content:

1. How to Make Corrugated Paper Carnations
2. DIY napkin clove
3. Colored Paper Carnations
4. Carnation from paper on a pattern
5. Origami paper carnations

DIY carnations

These beautiful carnations from napkins performed in origami technique and look very realistic. See below Master Class and you can make such flowers with your own hands without much effort. Before you begin, you must know some moments. Carnation has 3 rings. The more you doubt the paper in the center of the flower, the more realistic the clove will look. Finally, bend the edge of each ring with the letter “s”, then the flower will look more voluminous and attractive.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

DIY Corrugated Paper Carnation

This easy to manufacture corrugated paper clove Looks great both alone and in a bouquet. you also can don't make a stalk and use flowers for a wreath.

What do you need:

• corrugated paper
• duct tape
• stalks of wire or straw, chenille wire, wooden dowels, etc.

Fold 38 cm of corrugated paper in half, then again in half and so on several times to a width of approximately 3 cm. Cut the ends with scissors so that create a shabby look. For the serrated edge of the petal, cut the three rounded protrusions at the top. Fold the strip up, tying the bottom up. Pass the wire rod through the top and pull it down so that it is not visible in the flower. Wrap the ribbon around the bottom of the flower. Beautiful corrugated paper clove ready.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Corrugated paper carnations step by step

This one is very realistic paper clove look like a living flower. Try to experiment when you make them, put in a vase and no one will feel the difference until they start to smell. Of course, this carnation takes more time and workthan other crafts, but if you do everything right, then there will be something to be proud of. In order to make a clove of paper with your own hands you will need corrugated paper that needs to be dipped in bleach for a two-color effect, watercolor paints, brush, glue, scissors, wire and flower ribbon.

See the master class below in the gallery for step-by-step photos.. There are many nuances in the process, so do not be lazy and read the instructions on the site.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a clove of paper with your own hands

These solitary paper carnations Long stem perfect for Valentine's Day gift. You will need paper, flower ribbon, cardboard, wire, scissors, pliers and paper glue. The look of this paper carnation has its advantagesbecause it is larger than flowers from single-layer paper. Curved petals look almost like real ones, and they are easy and inexpensive to make.

Bend the square sheet a few times diagonally in half to make fan folds. Continue folding in half until the paper is as narrow as a blade. Then expand. Gather paper in the center and fold it down.Expand and repeat several times. Hold the paper horizontally with your right hand, squeeze approximately 2 cm from the end and intercept with your left hand. Flip back and bend around the fold. Continue until you get 3 rows of petals.

Turn the base and cut off the excess. Wrap tape around the wire and leaves. Here is the most interesting! Starting from the outer lobe, gently straighten the folds. Take the flower and fold the petals to the center. Continue with the other two rows. Cut a narrow strip of cardboard and write "choose me valentine" on the right side. Add some glue to the left side, fold over the stem and fasten.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Quick and easy flower made of paper

Instructions for beginners how to quick and easy to make a clove from paper with a pattern. Of course, it’s easier to watch the video on the site, it shows everything in great detail, but this clove is actually very simple, so these few photos will be enough to make a paper flower with your own hands. Download the template first. If you do not have a printer, attach paper to the screen, use a pencil and circle the template. Cut the circles, but not evenly, so that the edges are more realistic. Twist the round base.

Insert the wire into the layers of the petals. Use the wand to curl the petal to make it with natural bend. Wrap a thick strip of paper to form a sepal and cover with green paper, cut out of the pattern. Wrap the floral ribbon around the sepals and wire. Insert the leaves by wrapping the ribbon.

The clove is ready, not at all difficult.

How to make corrugated paper cloves

Tired of buying new flowers every week? Do you want to spend your free time interestingly and profitably? Why not try to do DIY corrugated paper clove. The instructions that you can read on the website (link under the gallery) will provide you with a clear description of each step to make a flower. Here are some tips.. Start by trimming the small lines at the round edges of the petal in one direction. Then flip the petal and, holding the scissors in the same direction, cut the edge again. As a result, you will get jagged edges. Repeat this for each petal.

Still, how to stick sheets on a stalk. There are two ways.
Method 1 : Twist a third of each sheet so that they can act as a joining handle. Then use floral tape to stick the leaves on the stem.
Method 2 : Use glue to stick a third of the leaves directly on the stem, instead of twisting the ends, as in the first method. However, a floral ribbon is still necessary to cover the connecting part of the leaves with glue.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make a clove of colored paper

Paper Carnation Flowers can be done quickly and easilyusing various methods and materials. Ready-made flowers can make an excellent composition or festive decoration. Use not less than 5 sheets, you can do more if you want to do more bulk paper clove. Sheets can be of the same color or different colors depending on the idea of ​​your design. Fold the paper like an accordion or fan. Each fold should be between 2.5 and 3.8 cm wide. Then do as in step-by-step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Circular cutting method. Fold 12 sheets of paper. Sheets can be folded up to 48 layersto save time. Draw circles on 7.5 cm paper. Cut circles on all sheets. You will have a stack of 48 paper circles left. Add up 12 paper circles. Fasten the pieces with a paper clip and cut two holes in the center, for example with a large sewing needle. Skip chenille wire through the holes.Having pushed through one hole, bend and push back into another hole to form a loop that secures the paper. Separate the sheets, gently pull the paper toward the center of the flower and remember the base firmly to maintain the shape of the flower.

• 
• 
• 
• 
• 
• 
•  

Carnation from paper on a pattern

Carnation is a full, tousled, rounded flower, so if you want to make DIY paper clove, the main task is to beautifully pack the petals. One more feature Carnation is a cupped sepal under a flower. The author of this project took several attempts to make a beautiful pattern, including tiny leaves. This is a bit complicated technique, so the author took full-length video About, how to make a clove from paper with your own hands, you can watch it on the site, a link under the gallery. There you can download a carefully designed paper clove template. See the procedure below in master class on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Master class corrugated paper clove

See another example of how to make simple bulk corrugated paper clove. This version of the flower, although similar to the above options, but the technique here is a little differenteasier, so this craft is great suitable for children. First you need to cut a strip with a width of about 10 cm. Wrap a few centimeters inward, as shown in the photo. Then wind the strip onto the wire and secure it with wire. Trim the edges and straighten. Wrap the bottom flower ribbon, fluff paper a little and clove is ready. Make like that do-it-yourself paper flower can be very fast, so if you need a whole bunch, you won’t have to spend a lot of time. The whole process is beautifully shown. in the master class on step by step photosSee below in the gallery.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make origami carnation

Such origami clove make it very simple. First flip and fold, then fold in half and unfold. Bend both edges to coincided with the center line. Then bend both edges again. Expand. Fold alternately between valley and mountain fold. Fold in half. Trim the edge in a dashed line. Expand and origami clove is ready.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Dianthus Origami Scheme

Using these schemes, make clove origami to decorate the house or collect a bouquet of several flowers. How to make origami carnation. Fold the paper along the dotted line in the direction of the arrow. Expand to make a small pocket. Then straighten the edges of the pocket. Turn over the paper. Then make another pocket and unfold again. Fold paper along the dotted line in the direction of the arrow. Then repeat this all again. Bend in the direction of the arrow and cut along the dashed line. Unfold paper in the direction of the arrow. Origami clove is folded.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Origami Carnation step by step

Or another example origami carnations with detailed step by step photos.

Here, the stem is shown separately, at the end of the carnation flower, simply put it in the pockets of the stem.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Coffee Filter Carnation

This is very interesting occupation, to make flowers from unusual materials, although the idea of ​​using coffee filters for such crafts is far from new. Make coffee filter cloves not at all difficult. Paint them and fold them first. The petal is the same shape as roses and poppies. Cut the fluffy edge with scissors. Collect the petals fan shaped. Wrap the petals tightly. Open the paper clove, creating a hollow base for each petal. Move in a circle to form a flower. Then bend the petals closer to the stem to create a ball shape. Fasten and seal with tape. Wrap the wire with green ribbon.

• 
• 
• 
• 
• 
• 
• 
• 
•  

Paper carnations 50 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•