How to make claws out of paper. Step-by-step instructions + 300 photos

 

Origami paper claws

This is an amazing and fun project you can do. paper origami claws one for each finger, like a monster or superhero. They can also be part of party costumes, which can also be done with your own hands. For crafts, you need only one sheet of paper (better, of course color). How to do, shown in step by step photos. Note. If the last folded tongue does not remain in your pocket (possibly due to free folding), you can fix the fold with a piece of adhesive tape.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make paper claws

In fact make paper claws very simple. Short instruction. Fold down to the right corner until the edge aligns with the left side of the paper. Fold the upper left corner to form a triangle. Fold the bottom corners until the edges converge. Then bottom up over the top of the triangle. Turn the paper upside down. Take the right side and fold until the right edge aligns in middle of the triangular part. Fold the newly folded section. Then again. On the opposite side, put a loose piece of paper in your pocket. Fill and bend. Insert your finger into the space in the valve. Make 4 more claws out of paper, put on and have fun.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make paper claws on fingers

Here is another similar way, how to make claws out of paper with your own hands.

Everything is very simple, but be careful, even paper claws can be very sharp, so you should definitely not poke them in the face of yourself or another person.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Origami finger claws: three ways

Shown here three ways how to make origami claws out of paper. The firstfrom plain paper. You can use any type of paper that you have at home. If you want to strong clawsthen use thick paper. Most likely it will turn out not very beautiful, but enough for a long time. Second option using origami paper. A standard sheet is 22 x 28 cm, you will need to cut a part to get an even square. AND third option from plain paper but using alternative technology.

How to make paper claws using these three methods, read the instructions on the site, or maybe it will be enough step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Claw from paper scheme

Paper claws have many uses: to scare people (for some reason not everyone is afraid) and just watch and enjoy your cool claws made of paper. There are different versions of this craft - simple and complex, long and short, folding, wolverine claws and cat claws. According to this scheme, you can do the usual paper origami claw, and the rest of the traditional options are basically formed on the same principle, except for specific crafts, such as saber-shaped claws of wolverines.

• 
• 
• 
• 
• 
• 
•  

Check out some more schemes for folding paper claws

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make A4 paper claws

You have already seen different examples, but here it’s shown how to make claws out of paper in one collage.

How to make wolverine claws out of paper

This guide shows how to make wolverine claws out of paper do it yourself. For this project you will need 7 sheets of A4 paper, 6 toothpicks, super glue and if you want to paint, then silver paint. In step by step photos shown how to make one claw, add the remaining five according to this pattern. The idea is probably understandable. Fold the sheet in a narrow strip, glue the ends and make a holder of toothpicks, on which the remaining clutches of the wolverine will be held. You can read more in the instructions on the site.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Cardboard Wolverine Claws

If you liked the idea, but want something more solid, then here is an example, how to make wolverine claws out of cardboard.

These dangerous claws of a saber are made of an ordinary cardboard box, so that you can not look for material for a long time. Want to know the details, link to the site under the gallery.

• 
• 
• 
• 
• 
• 
•  

Paper Wolverine Claws photo

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Paper Dragon Claws

There is no better way to appreciate mystical creatures than to become like them! Make one hand like this paper dragon claws for a game or a home party and let the guests tremble with fear. For crafts, you need to prepare one sheet of paper for each finger. Keep in mind that the thinner the paper, the easier it will be to fold! Take the top right corner and fold it so that the top edge matches the left side of your sheet of paper. Sequence, how to make a claw out of papershown below in the photo.

In short, it should look like this.

Take the upper right corner and fold down. Then top left corner and fold right to form a triangle. After that, fold the bottom left corner to meet at the bottom of the triangle, then the same thing with the bottom right corner. Fold everything below the triangle so that the ends lie on top of the triangle.

Rotate 180 ° so that the short end of the triangle now points down. Take the right side of the triangle and fold it up so that it aligns with an invisible line in the middle of the triangle. Fold this new shape once to the left ...

Flip over and there will be a loose tip in front. Fill in a small pocket behind it and bend to close.

At the short end of the claw there should be a small hole. Insert your finger and your first claw is ready! Continue this process for each finger until you make a complete set of paper dragon claws. Of course, this is an abbreviated instruction, if something is not clear to you from the photographs, the full version of the instruction, how to make claws out of paper do it yourself on the site. Have fun, just be careful.

Cat's claws made of paper

Here's how to do cat claws made of paper in the origami technique. If you are still not familiar with this art, use glue and scissors.

Cat paper nails small, so folding them a little harder. Here is the first step, the photo shows which bends to make.

In the second part, you must carefully bend the workpiece so that got a pocket, insert a free angle into it and you get a ring.

It’s not difficult to do, but if you are new to origami, read the instructions on the website.

Cat claws photo

Check out some more examples cat claws made of paper usually made short and put on knuckles.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make long claws out of paper

You probably already know how to do regular DIY paper claws. Here is just an option, a way, how to make paper claws longer! First of all, you need a stack of paper, any color that you choose. Also prepare scotch tape, sharp scissors and be patient - it will takesome time. How to make an elongated clawshown in step by step photos, but it is better to read the instructions to find out all the nuances, it is not big, but detailed. Shown here only one size, other sizes are pretty easy to make, just follow the same principle as in the example shown.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Big claw made of paper

Shown here how to make a big paper claw without tape. So all you need is paper and your hands. Just take a piece of paper, bend the upper right corner to the side, forming a triangle. Then fold the upper left corner and bend in the opposite direction, just down. Then fold the paper to make a square. Fold the top edge in the opposite direction, and the upper left corner in the middle. Then again to the right, and the other side of the paper to the left. And finally, all you have to do is put a high point and fold it inside the triangle. And here is a huge paper claw, like Edward Scissor's hands ready.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make origami claws on fingers

Ever thought about make paper claws? If you have a child who loves Wolverine, cats or monsters, then this craft is for you. Above you saw several different examples, but it can be said simplified version. So just grab two sheets of plain paper and make claws of origami. First of all, cut the paper into 8 equal rectangles. These are small claws, so a lot of material is not needed. I don’t know, or you need instructions, on step by step photos everything is shown very clearly.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Origami paper claws

Just put these origami claws on your fingers and watch how everyone scatter in fear in different directions! You will need a sheet of square paper for each finger, and make paper claws very easy. Fold the top half down to make an inverted triangle. Then bend the left half to the right, you get a small triangle. Fold a small triangle, aligning the edges on the right, then expand. Open the hole in the larger triangle to form a pocket and tuck in a little triangle. Insert your finger in your pocket and that’s it. Just right?

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

How to make claws of paper in stages

Look how to make claws out of paper with this simple walkthrough. This is an easy origami, a fun project that children will never get bored.

Just take a piece of paper and do as shown in the master class on step by step photos.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Paper Claws - Printed Origami

Kids of all ages love make claws of origami. Pencils or felt-tip pens can be used to color paper claws, but the results are uneven. A much better option is seal. How to make claws of origami using printed paper, can be read in the article on the site, the link can be found under the gallery. It turns out very beautifully. Full-size images of four patterns and how to make origami claws out of them, you can see on step by step photos in the gallery. There is also a video on the site that contains additional information and can help better explain the process of making crafts.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Claw with paper claws

This original design, claw paper manipulator can pick things up, you can make captures open and closed, so there are no external parts except claw segments. For this design you will need thick cardboard, although you can try with ordinary cardboard, if you are not going to lift something heavy. Another glue, scissors and a few paper clips. How to make this paper grabread the instructions on the siteShe is quite long. There is also a video where you can see how this thing works.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•  

Claws made of paper 30 photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•